.jpg)
* Carefully release the screws at 7 different locations from the rear cover. (Torque:1.1±0.1kgf.cm)(Size: M1.4*L3)
* Disengage the rear cover from the front cover by using the hook at 12 points that colored in red (Follow the numbered sequence when you disjoint)
* Separate the coaxial cable of antenna assembly from the PBA. Release the screw at 2 points(Size: M1.4*L3) (Torque:1.1±0.1kgf.cm)
* Detach the side FPCBs from the Bracket.
* Separate all connector ribbons from the PBA. Separate the PBA from the Front.
* Release the screw at 2 points (Size: M1.4*L2)(Torque:1.1±0.1kgf.cm)
* Separate the sub PBA from the PBA.
* Separate the Receiver assembly from the Front.
(Insert along nose tweezers into the holes for easy separation.) Be careful not to damage the FPCBs.
CLICK ON THE PICTURES TO MAGNIFY