ApplIcable to SONY - KDL-40XBR4_ 40XBR5_46XBR4_46XBR5
.jpg)
To adjust various set features, use the Remote Commander to put the set into service mode to display the service menus.
TV should be in standby mode. (Power off).
Press the following buttons on the Remote Commander within a second of each other: Display > Channel (5) > Volume (+) > TV Power.
The first service menu (TV) displays.
To display the service menu that contains the category you want to adjust, press (JUMP) on the Remote Commander.
CLICK ON THE PICTURES TO ZOOM IN
The screen displays the first category in the selected service menu.
To change the category, press (2) or (5) on the Remote Commander.
Note: Pressing 2 or 5 only changes the categories within the service menu displayed. To change a category on one of the other service menus, press the {JUMP} button until the correct service menu is displayed.
To change the adjustment item, press (1) or (4) on the Remote Commander.
To change the data value, press (3) or (6) on the Remote Commander.
To write into memory, press {MUTING} then (0) on the Remote Commander.
To exit service mode, turn the power off.
UPDATING MODEL INFORMATION AFTER REPLACING THE FB1 BOARD.
Access the Service Menu (as described above)
Press the {JUMP} button until the BEM micro service menu displays.
Press (2) until the (0001 MODEL_INFO) category displays.
Using the (3) or (6) on the remote commander to increase or decrease the value, do one of the following:
[If model size is 40” > Set to (0)]
[If model size is 46” > Set to (1)]
To write into memory, press {MUTING} then (0) on the Remote Commander.
To exit service mode, turn the power off.