Sony - XBR-40LX900 _ 46LX900 _ 52LX900 _ 60LX900_ LCD TV Disassembley Procedure & Parts List
.jpg)
Remove 4 screws from Table-Top Stand Assembly
Lift up TV set to detach from Table-Top Stand Assembly.
Gently place the TV set face down onto a soft cloth.
CLICK ON THE PICTURES TO MAGNIFY
A Remove screws from Rear Cover
6 from XBR-40LX900 Only
8from XBR-46LX900/52LX900 Only
B Lift up Blind Touch Key Cover to remove from Rear Cover
C Lift up Bottom Cover to remove from Rear Cover
D Remove 4 screws from Rear Cover
E Lift up Terminal Cover to remove from Rear Cover
F Remove 1 screw from Terminal position
G Remove 1 screw from Side Jack position
H Remove 2 screws from Under Cover to detach from Bottom Frame
I Disconnect AC Inlet from GE5/GE4B (Power) Boards and detach from Under Cover
J Remove 2 screws from Vesa Brackets to detach from LCD Panel
K Lift up Switch Unit and disconnect 1 connector to remove from LCD Panel
L Slide out Power Switch and disconnect 1 connector to remove from Switch Unit.
NOTE:The Vesa Brackets are not included with the LCD Panel and must be reattached to the replacement LCD Panel.
XBR-60LX900 ONLY
A Remove 8 screws from Rear Cover Assembly
B Lift up Blind Touch Key Cover to remove from Rear Cover
C Lift up Bottom Cover to remove from Rear Cover Assembly
D Remove 4 screws from Rear Cover Assembly
E Lift up Terminal Cover to remove from Rear Cover Assembly
F Remove 1 screw from Terminal position
G Remove 1 screw from Side Jack position
H Remove 2 screws from Rear Cover Top
I Remove 1 screw from Under Cover to detach from Bottom Frame
J Remove 1 screw from AC Inlet to detach from Bottom Frame
K Disconnect AC Inlet from GE4A (Power) Board and detach from Under Cover.
L Remove 2 screws from Vesa Brackets to detach from LCD Panel.
M Lift up Switch Unit and disconnect 1 connector to remove from LCD Panel.
N Slide out Power Switch and disconnect 1 connector to remove from Switch Unit.
NOTE:The Vesa Brackets are not included with the LCD Panel and must be reattached to the replacement LCD Panel.
SPEAKER BOX ASSEMBLY, HEM BOARD, CAMERA MODULE AND HLR BOARD REMOVAL
A Lift up right-side Speaker Box Assembly to remove from Speaker Bracket
B Lift up right-side Speaker Bracket to remove from Bottom Horizontal Frame
C Disconnect 1 connector from HEM Board, then release clips and lift up to remove from Bottom Cabinet RightD Remove screws from Bottom Frame to detach from LCD Panel
5 from XBR-40LX900/46LX900/52LX900 Only
6 from XBR-60LX900 Only
E Remove 1 screw from Camera Bracket to detach from Bottom Cabinet Center
F Disconnect 1 connector from Camera Module, then release clips and lift up to remove from Bottom Cabinet Center.
G Lift up Camera Ornament to remove from Bottom Cabinet Center
H Lift up left-side Speaker Box Assembly to remove from Speaker Bracket
I lift up left-side Speaker Bracket to remove from Bottom Horizontal Frame
J Disconnect 1 connector from HLR Board, then release clips and lift up to remove from Bottom Cabinet Left.
K Remove 2 screws from LVDS Holder to detach from LCD Panel.
GE5/GE4B/GE4A (POWER) BOARDS, BUHS BOARD, WIFI ANTENNAS AND WIRELESS LAN CARD REMOVAL
A Remove screws from GE5/GE4B/GE4A (Power) Boards
4 from GE5 (Power) Board (XBR-40LX900 Only)
5 from GE4B/GE4A (Power) Boards (XBR-46LX900/52LX900/60LX900 Only)
B Disconnect 6 connectors from GE5/GE4B/GE4A (Power) Boards
C Slide Terminal Bracket to left-side to remove from BUHS Board
D Disconnect 5 connectors from BUHS Board
E Remove 9 screws from BUHS Board
F Slide Side Jack Bracket to right-side to remove from BUHS Board
G Remove 3 screws from B Frame Left to detach from LCD Panel
H Remove 5 screws from B Frame Right to detach from LCD Panel
I Remove 1 screw from Antenna to detach from Bottom Horizontal Frame
J Remove 1 screw from Antenna to detach from Vertical Frame Left
K Remove 2 screws from WIFI Card to detach from LCD Pane.
HORIZONTAL FRAMES, VERTICAL FRAMES, CORNER JOINTS AND BOTTOM CABINET ASSEMBLY REMOVAL
A Remove 8 screws from Corner Joints to detach from Horizontal and Vertical Frames
B Remove screws from top Horizontal Frame to detach from LCD Panel
4 from XBR-40LX900/46LX900/52LX900 Only
5 from XBR-60LX900 Only
C Remove screws from Vertical Frames to detach from LCD Panel
4 from XBR-40LX900/46LX900/52LX900 Only
8 from XBR-60LX900 Only
D Slide out Frame Clamps to detach Vertical Frames from LCD Panel
2 from XBR-40LX900 Only
4 from XBR-46LX900/52LX900 Only
6 from XBR-60LX900 Only
E Remove 4 screws from bottom Horizontal Frame to detach from LCD Panel.
F Remove screws from bottom Horizontal Frame to detach from LCD Panel.
2 from XBR-40LX900/46LX900 Only
4 from XBR-52LX900/60LX900 Only
G Lift up Bottom Cabinet Assembly Left to remove from Bottom Horizontal Frame
H Lift up Bottom Cabinet Assembly Center to remove from Bottom Horizontal Frame
I Lift up Bottom Cabinet Assembly Right to remove from Bottom Horizontal Frame.
