PURPOSE: In order to insert the new SA adjustment values, it need clearing SA initial values of the flash memory.
REQUIRED SA RESET:
- After changing Traverse.
- After changing Main Board Assembly.
- After changing Main Board Flash IC.
- After the set turn on.(then, mode is the home menu).
- Press HOME key to escape from home menu.
- Press the 4 => 5 => 6 => 2 => 5 => 8 =>> 0 (numerical button) on the remote controller to display debug window.
- Select 6 on debug window to perform SA Reset.
- Press Return key or Pause key to finish debug mode.
- Playback once BD disc more than 3 seconds. (At this time, you must use BD ROM single layer and BDR single layer disc.)
TO CHECK THE LAYERS OF DISC
