ONIDA COLOUR TELEVISION – 14XS / 20XS / 21IQ/ 14TVE / 20TVE / 21TVE/ 21BLACK FGL (FTG)/ 21FLAT3G
.bmp.jpg)
NB:You should have its original remote control to enter Service Mode and adjust the data values. No Universal remote control, or others can be used for this purpose.
* The following display comes on the screen by pressing DISPLAY key and VSM key at the same time.
** [For Model: 21XSW4 Series: Press "VSM" and "+" On remote control.]
[1] FACTORY
[2] SERVICE MODE
* Press CURSOR UP OR DOWN key to be in Service menu.
* To select Service Menu parameters use CURSOR ▲/▼ key and to adjust these parameters use CURSOR ◄/► key.
H-LINE
1.To get H-line press VSM and DISPLAYSimultaneously.
2. Press CURSOR UP KEY to get R CUTOFF.
3. Press '0' to get H-line.
4. To come out of H-line again press '0'.
VSM PRESET
There is FOUR VSM
PRESETS. (CARTOON,FILM/POP,NEWS,)
For the setting of individual VSM PRESETS
1. Press VSM and DISPLAY at the same time.
2. Press CURSOR DOWN key to get the Setting for the
VSM PRESET.
3. Press CURSOR DOWN key for the selection of each parameter.
4. Use CURSOR LEFT/RIGHT key for their setting as per the table given below.
5. Press VSM Key for selection of VSM PRESETS.
A. Digits specified for the various parameters (not specified as FIX) are closer to the values to be adjusted. The final adjustment should be as per the procedure specified.
B. Digits mentioned in the Service Menu should not be changed wherever ‘Fix’ is mentioned, elsewhere they are subject to change as per procedure specified
SMPS SCHEMATIC
CLICK ON THE PICTURES TO MAGNIFY