SET YOUR AIWA DVDs TO REGION-FREE
[Aiwa AVJ-X33, AVJ-X55, HT-DV50, XD-AX1, XD-DK601, XD-DV10, XD-DV170, XD-DV290, XD-DV380, XD-DV485, XD-DV487, XD-DV500, XD-DV530, XD-DV600, XD-PK701, XP-K7, XP-KR9, XR-DV120, XR-DV526, XR-DV700, XR-DV701, XSDV335RW] _ No known unlock codes.
Aiwa XR-DV525
- Unplug hte player
- Press and hold DVD/CD
- Plug the player in
- Press FFW
- "Factory" is displayed
- Release the keys.
- Plug the player in and turn it on with the remote "No Disc" is displayed
- Press PAUSE, 8, 9, 2 and 6 "CODE__" is displayed
- Press 0 2x within 5 secs
- Press PAUSE and POWER.
Possibly only works with RC 4.
- Plug the player in, but don't turn it on ("Off" is displayed)
- Press and hold MENU
- Press and hold TOP MENU
- Press and hold POWER
- Press all 3 buttons for 3 secs and then release them "Factory" is displayed.
- Turn on the player
You need an One For All remote(URC 7030)
- Press "DVD" on the player
- Press and hold MAGIC
- Enter 0, 5, 3, 3
- Press and hold MAGIC again
- Enter 9, 9, 4
- Press MAGIC
- Press "1-5" and enter the following code
- Repeat from step 4 until all 5 keys are programmed: Key 1: 189 // Key 2: 255 // Key 3: 095 // Key 4: 221 // Key 5: 079
- Turn on the player (standby /without a disc inserted)
- Press "1-5"
- Player turns on
- Press "1-5" again
- Player turns off.
- Turn on the player (without a disc inserted)
- Open the disc tray
- Press MENU
- Press 1, 6, 7
- Current region is displayed
- Press MUTE
- "All" is displayed
- Turn the player off
- Press DVD/CD
- Press OPEN
- Press C, 2, 5, 8, 0, C ("Testmode" is displayed) Onscreen display shows current RC
- Press Up ("14 02" is displayed (02 is RC))
- Press 1, 4, 0 and X (X = region; 0 = codefree)
- Press ENTER
- Press RETURN ("Testmode" is displayed)
- Press C ("EEP CLR and EEP ERR" is displayed)
- Insert a DVD
- Press RETURN.
- Turn on the player (without a disc inserted)
- Press ENTER
- Press 8, 4, 2, 6, 9
- Press ENTER again.
- Press ON/OFF on the player
- Press and hold MENU, TOP MENU, OSD
- After approx. 3 secs "Factory" is displayed
- Release the keys
- Turn on the player.
- Using the open button on the machine, open the disc tray. Make sure it's empty. Make sure you can see the DVD on your TV screen 2. Press MENU on remote (not top menu), you should see the on screen pectoral graphics on your TV screen
- Using the remote, press 1, 6, 7
- On the screen you should see over the top of the graphics "region 1-6".
- Press MUTE button and next to "region 1-6" you should see "all"
- Then use the remotes POWER OFF button and the DVD should close the (empty) tray.
- Restart the unit, put in a region disc and it should play it.
- Turn on the player
- Insert a disc
- Open the disc tray, take the disc out, close the disc tray, press STOP instantly
- Press 8, 7, 2, 0 and >> For selection of a specific RC replace >> with Code (1-6). If this doesn't work, press 1 instead of 2 in step 4.
- Press PAUSE
- Press 3, 1, 4, 1, 5, 9
- Press the button for the desired RC (0=code free)
- Press PAUSE
- Turn the player off.