* To enter ‘Service Mode’ Press the remote -control keys in this sequence:
* If you do not have Factory remote – control [Power OFF> INFO> MENU> MUTE> POWER ON]HOW TO ACCESS SERVICE MODE
Using the Customer Remote
- Turn the power off and set to stand-by mode
- Press the remote buttons in this order; POWER OFF - INFO - MUTE - POWER ON to turn the set on.
- The set turns on and enters service mode. This may take approximately 20 seconds.
- Press the Power button to exit and store data in memory.
Initial SERVICE MODE DISPLAY State
HOW TO ENTER HIDDEN FACTORY MODE
# into the factory mode
# move the tap to Advanced
# key input : 0 + 0 + 0 + 0
** hidden menu : Advanced.
BUTTONS OPERATION WITHIN THE SERVICE MODE
* Direction Keys ▲/▼à Item Selection by Moving the Cursor.
* Direction Keys ◄/►à Data Increase / Decrease for the Selected Item.
* Source à Cycles through the active input source that is connected to the unit.
FACTORY DATA
CLICK ON THE TABLE TO MAGNIFY