Service Mode_Initialization_Initial Setting Values_Power Supply Regulator section Schematic & Universal Remote Control Set-up Codes.
![]()
Universal Remote Control Set-up code list.
3-digit codes: 004,008,009,062,068,069,074, 075,077,155,161,163,189,198
4-digit codes: 0001 0321 0371 0701 0931 0961 1021 1221 1381 1801 1821 2761 1961 2321 0392
5-digit codes: 20675, 20821, 21268.
SERVICE MODE
* Use the service remote control unit.
* Turn the power on. (Use main power on the TV unit.)
* Press the service button on the service remote control unit.
* Turn the power on. (Use main power on the TV unit.)
* Press the service button on the service remote control unit.
PREPARING A SERVICE REMOTE CONTROL OUT OF SUPPLIED REMOTE CONTROL ALONG WITH TV
Cut “A” portion of the attached remote control unit as shown.
INITIAL SETTING VALUES [DEFAULT DATA VALUES]
Enter the Service mode. Set the each initial data as shown on table.
HOW TO INITIALIZE (Reset) THE TV
* Turn the power on. (Use main power on the TV unit.)
* To enter the service mode, press the service button on the service remote control unit.
>> To cancel the service mode, press [POWER] button on the remote control.
* To initialize the LCD television, press [DISPLAY] button on the remote control unit.
* Confirm "FF" indication on the upper right of the screen.
* To enter the service mode, press the service button on the service remote control unit.
>> To cancel the service mode, press [POWER] button on the remote control.
* To initialize the LCD television, press [DISPLAY] button on the remote control unit.
* Confirm "FF" indication on the upper right of the screen.
POWER SUPPLY REGULATOR SECTION CIRCUIT.
Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown, first check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.
CLICK ON THE SCHEMATIC TO ZOOM IN