H-LCD2601_HYUNDAI LCD TV_FACTORY MODE_KEY COMPONENTS_Fault Symptoms & corrections_Power Supply [SMPS] Schematic (Circuit Diagram)
CHD-W320F8
Built-in power supply module > FSP179-4F01
Electronic tuner > TMI4-C22P2RW or TAD5-C2IP1RW
Electric speaker > Y2929-01-5W-8Ω or Y50138-01-8W-8Ω
Remote controller > KLC5B
Main board assembly - LG screen > JUJ6.690.035 _ PCB JUJ7.820.088
Main board assembly - SAMSUNG screen > JUJ6.690.035-4 _ PCB JUJ7.820.088
Built-in power supply module > LC320W01 - LG screen
LCD display screen > LTA320W02-L01 - SAMSUNG screen
Electronic tuner > TMI4-C22P2RW/ TAD5-C2IP1RW
Electric speaker > Y2929-01-5W-8Ω/ Y50138-01-8W-8Ω
Remote controller > KLC5BCHD-W370F8
Main board assembly > JUJ6.690.035-9 - PCB JUJ7.820.088
LCD display screen > LC370W01
Suspending screen > TMI4-C22P2RW
Electronic tuner > TMI4-C22P2RW | TAD5-C2IP1RW
Electric speaker > Y3297-R-10W-8Ω | Y3939-01-5W-8Ω
Remote controller > KLC5BSymptoms and Correction
The display boards of PC no image in DVI.
Reason and Resolve: If some display board of DVI cannot receive the data when turning on the TV, there is no output; if pull out the DVI line abruptly, there is also no DVI output; Before starting PC, connect the DVI line with LCD TV steadily, So DVI can receive the correct date from DDC Display
Data Channel when turning on the TV,DDC is in chassis 24LC21.
Reason and Resolve: If some display board of DVI cannot receive the data when turning on the TV, there is no output; if pull out the DVI line abruptly, there is also no DVI output; Before starting PC, connect the DVI line with LCD TV steadily, So DVI can receive the correct date from DDC Display
Data Channel when turning on the TV,DDC is in chassis 24LC21.
No picture but sound, on LOGO when turning on the TV, poor light is bright.
Reason and Resolve: Check the connect line in up screen, and connect the line
Reason and Resolve: Check the connect line in up screen, and connect the line
No picture no sound ,no snowflake in TV condition, but AV is normal.
Reason and Resolve: Check the outside of RF(also bus and power supply), there is no problem ,but no output from RF, so the RF is disabled.
Reason and Resolve: Check the outside of RF(also bus and power supply), there is no problem ,but no output from RF, so the RF is disabled.
LCD TV cannot be controlled.(inc red lamp is no but the TV is off, remote control and key press in TV cannot control the TV etc.)
Reason and Resolve: The LCD TV cannot work abruptly, power off and turning it on again.
Reason and Resolve: The LCD TV cannot work abruptly, power off and turning it on again.
Enter into factory menu
* Enter into child lock of main menu in TV mode, press “OK, the password input box will appear
* Use remote control to input the follows in order: (7 | red key | 9 | blue key) then you can enter into factory mode menu. After entering into factory mode menu, sign of the factory menu M will appear.
* Enter into child lock of main menu in TV mode, press “OK, the password input box will appear
* Use remote control to input the follows in order: (7 | red key | 9 | blue key) then you can enter into factory mode menu. After entering into factory mode menu, sign of the factory menu M will appear.
Factory menu display.
M
M
Index: 1
HWUC_BRI 0x1F
The M denotes entering into factory mode now, the figures of index denotes the index number now, the HWUC_BRI denotes the name of adjusting item now, the 0X1F denotes the numerical value.
HWUC_BRI 0x1F
The M denotes entering into factory mode now, the figures of index denotes the index number now, the HWUC_BRI denotes the name of adjusting item now, the 0X1F denotes the numerical value.
Each adjusting item have only one index number, the operator press the numeric key or press P+/P- directly.
Adjustment methods for factory menu
Select the adjusting item.
Select the adjusting item.
You can skip to the adjusting items by pressing the number key, also can select the adjusting item in the order of P+/P-.
When pressing the number key, if the adjusting item is 1~9,input the corresponding number keys and press down “OK”.
If the adjusting items tens digit, input a tens digit. (For example ,press number key 8 when adjusting the volume, you can see the colour which become green, then press down “OK”, the colour of index number turns red, So you already selected corresponding volume adjusting item. If adjust DVD pre-set, first input 1,then input 3,you can adjust DVD pre-set.)
Adjustment methods
Adjust it according to the operating key in above list. For one acting operation, press OK/V+. [Example Auto Colour, for some variable add/reduce, Example Volume, press V+/V- .]
Adjust it according to the operating key in above list. For one acting operation, press OK/V+. [Example Auto Colour, for some variable add/reduce, Example Volume, press V+/V- .]
The illuminate of white balance and Auto Color adjustment method
Press “OK” or “V+”,appear corresponding three variable, press “P+/P-”to select, press “V+/V-”,press down menu key to exit.
The index of Auto Colour is 12,press “OK” or “V+” to do colour revise, then the adjusted value will display.
Press “OK” or “V+”,appear corresponding three variable, press “P+/P-”to select, press “V+/V-”,press down menu key to exit.
The index of Auto Colour is 12,press “OK” or “V+” to do colour revise, then the adjusted value will display.
SMPS SCHEMATIC[Click on the Schematic to Magnify]
