How to enter Service Mode & White Balance adjustment _ Schneider 26M911 TFT-LCD TV
![]()
SERVICE MODE
![]()
![]()
When the EEPROM has been replaced, the SVC data should be restored as the function of individual system and specification
To Enter and exit SVC mode
Note: Into the SVC mode, Initialize with default data.
Note: Into the SVC mode, Initialize with default data.
* Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same time to get into SVC mode.
* Press the PR ▲▼ button several times to find SVC Data.
* Input the corresponding SVC data referring to Table below with the VOL ◀▶ key.
* Press TV/AV button to exit SVC mode.
Factory outgoing setting & Initialize with default data (into the SVC mode). Do not change the “( )” items.
WHITE BALANCE CHECKING
CLICK ON THE PICTURES TO MAGNIFY