Circuit diagram for Goldstar MV 1615W - Microwave Oven
Rated Power Consumption .................................... 1,500W maximum (Microwave oven+Cook top lamp+Ventilation fan)
Microwave Output .................................................. 1,000W (IEC 60705)
Adjustable 100W through 1000W, 10 steps
Frequency .............................................................. 2,450 MHz ± 50 MHz
Power Supply......................................................... 120 VAC, 60 Hz
Rated Current ........................................................ 13 Amp. (Microwave oven+Cook top lamps+Ventilation fan)
Magnetron Cooling................................................. Forced Air Cooling
Rectification ........................................................... Rectification Voltage Double Half-Wave
Door Sealing ......................................................... Choke System
Safety Devices ...................................................... Oven Cavity Thermostat:
Open at 90°C±5°C
Fuse(20A)
Primary Interlock Switch
Secondary Interlock Switch
Interlock Monitor
Magnetron ............................................................. 2M214-39F
High Voltage Capacitor ......................................... Capacitor: 1.0µF, 2.1 KV AC
High Voltage ......................................................... Diode Diode; 350mA, 9.0 KV
Cook top Lamp ...................................................... 125 V, 30 W
Cavity Lamp .......................................................... 125 V, 30 W
Timer ..................................................................... Digital, up to 99 mim. 99 sec. (in each cooking stage)
Tray ....................................................................... Tempered Safety Glass
Overall Dimensions ............................................... 29 15 /16” (W)x16 7 /16” (D)x15 3 /8” (H)
Oven Cavity Size .................................................. 19 7 /8”(W)x14 3 /16”(D)x8 15 /16”(H)
Effective Capacity of Oven Cavity ......................... 1.5 Cu.ft.
Accessories ........................................................... Owner’s Manual & Cooking Guide, Installation Manual, Exhaust Adapter, Exhaust Damper, Mounting Kit and Two Filters, Rotating Ring Assembly.
Microwave Output .................................................. 1,000W (IEC 60705)
Adjustable 100W through 1000W, 10 steps
Frequency .............................................................. 2,450 MHz ± 50 MHz
Power Supply......................................................... 120 VAC, 60 Hz
Rated Current ........................................................ 13 Amp. (Microwave oven+Cook top lamps+Ventilation fan)
Magnetron Cooling................................................. Forced Air Cooling
Rectification ........................................................... Rectification Voltage Double Half-Wave
Door Sealing ......................................................... Choke System
Safety Devices ...................................................... Oven Cavity Thermostat:
Open at 90°C±5°C
Fuse(20A)
Primary Interlock Switch
Secondary Interlock Switch
Interlock Monitor
Magnetron ............................................................. 2M214-39F
High Voltage Capacitor ......................................... Capacitor: 1.0µF, 2.1 KV AC
High Voltage ......................................................... Diode Diode; 350mA, 9.0 KV
Cook top Lamp ...................................................... 125 V, 30 W
Cavity Lamp .......................................................... 125 V, 30 W
Timer ..................................................................... Digital, up to 99 mim. 99 sec. (in each cooking stage)
Tray ....................................................................... Tempered Safety Glass
Overall Dimensions ............................................... 29 15 /16” (W)x16 7 /16” (D)x15 3 /8” (H)
Oven Cavity Size .................................................. 19 7 /8”(W)x14 3 /16”(D)x8 15 /16”(H)
Effective Capacity of Oven Cavity ......................... 1.5 Cu.ft.
Accessories ........................................................... Owner’s Manual & Cooking Guide, Installation Manual, Exhaust Adapter, Exhaust Damper, Mounting Kit and Two Filters, Rotating Ring Assembly.
PRECAUTIONS
SINCE NEARLY 2,100 VOLTS EXISTS IN SOME CIRCUITS OF THIS UNIT REPAIRS SHOULD BE CARRIED OUT WITH GREAT CARE.
The filament leads of magnetron carry High Voltage with respect to ground. Extreme caution must be exercised. Never plug the unit into a power source to determine which component is defective in high voltage section.
The filament leads of magnetron carry High Voltage with respect to ground. Extreme caution must be exercised. Never plug the unit into a power source to determine which component is defective in high voltage section.
> Before the power is applied; (a)Make sure the primary interlock switch, the secondary interlock switch and the interlock monitor switch operate properly by opening and closing the door several by opening and closing the door several times. (b) Make sure the perforated screen and the dielectric choke of the door are correctly and firmly mounted.
> After power is applied; (a) Make sure the interlock switch mechanism is operating properly by opening and closing the door. (b) Check microwave energy leakage must
be below the limit of 5 mW/cm2 (All service adjustments should be made for minimum microwave energy leakage readings).
> After power is applied; (a) Make sure the interlock switch mechanism is operating properly by opening and closing the door. (b) Check microwave energy leakage must
be below the limit of 5 mW/cm2 (All service adjustments should be made for minimum microwave energy leakage readings).
> Do not operate the unit until it is completely repaired, if any of the following conditions exist. The unit must not be operated. (a) The door does not close firmly. (b) The hinge is broken. (c) The door seal is damaged. (d) The door is bent or warped, or there is any other visible damage on the unit that may cause microwave energy leakage. [NOTE: Always keep the seal clean.] (e) Make sure that there are no defective parts in the interlock mechanism. (f) Make sure that there are no detective parts in the microwave generating and transmission assembly (especially wave-guide).
> The following items should be checked after the unit is repaired.
(a) The interlock monitor switch is connected correctly and firmly.
(b) The magnetron gasket is properly positioned and mounted.
(c) The waveguide and the oven cavity are intact.(no microwave energy leakage)
(d) The door can be properly closed and the safety switches work properly.
(e) The unit must stop when the door is opened or the time is up.
The unit must not be operated with any of the above components removed or by-passed.
(a) The interlock monitor switch is connected correctly and firmly.
(b) The magnetron gasket is properly positioned and mounted.
(c) The waveguide and the oven cavity are intact.(no microwave energy leakage)
(d) The door can be properly closed and the safety switches work properly.
(e) The unit must stop when the door is opened or the time is up.
The unit must not be operated with any of the above components removed or by-passed.
SCHEMATIC and PWB
OVERALL CIRCUIT DIAGRAM
CLICK ON THE PICTURES TO MAGNIFY