How to enter and Service Mode to adjust parameters to HANNSpree GT02-32E1 - GT03-37E1 & HANNSpree AT06 42 Inch LCD TV - LCD TV
* In the TV mode, adjust volume to Zero and press number keys 9 > 8 > 7 > 6 to enter service mode.
* To exit, press the EXIT button on the remote control.1 Switch on the LCD TV .
2 Press 991 on the remote control to enter the internal Service menu.
3 Press MENU to switch the service mode pages.
4 Press▲▼to scroll through the various menu options.
5 Press ◄►to change the menu settings.
6 Press MENUto save the new settings and switch to next page and press EXITto exit from service mode to normal mode.
2 Press 991 on the remote control to enter the internal Service menu.
3 Press MENU to switch the service mode pages.
4 Press▲▼to scroll through the various menu options.
5 Press ◄►to change the menu settings.
6 Press MENUto save the new settings and switch to next page and press EXITto exit from service mode to normal mode.
TV / AV / S-VIDEO / WHITE BALANCE / BRIGHTNESS & CONTRAST ADJUSTMENTS
WHITE BALANCE ADJUSTMENT
1 Press 991 on the remote control to enter the internal Service menu.
2 Press MENU to switch to the PW106 Scaler Menu page
3 Press ▲/▼to scroll to Page 2-3 options
4 Press◄/► to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings.
5 Press EXIT to save the new settings and exit. [Don’t adjust others setting in page 2-3]
2 Press MENU to switch to the PW106 Scaler Menu page
3 Press ▲/▼to scroll to Page 2-3 options
4 Press◄/► to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings.
5 Press EXIT to save the new settings and exit. [Don’t adjust others setting in page 2-3]
Click on the Pictures to Zoom In
BRIGHTNESS ADJUSTMENT
1 Repeat the above mentioned step 1 to 2
2 Press▲/▼to scroll to PW106 FE VDC Menu Page 2-1 options
3 Press ►◄adjust the Brightness setting.
4 Press ▲▼to scroll to TV/AV/S Parameter=AV1 setting and pressuto run the setting. (This procedure will copy the settings of AV1 to S & TV)
2 Press▲/▼to scroll to PW106 FE VDC Menu Page 2-1 options
3 Press ►◄adjust the Brightness setting.
4 Press ▲▼to scroll to TV/AV/S Parameter=AV1 setting and pressuto run the setting. (This procedure will copy the settings of AV1 to S & TV)
ATSC DTV WHITE BALANCE / BRIGHTNESS / CONTRAST ADJUSTMENT
1 Repeat the above mentioned step 1 to 2
2 Press ▲▼ to scroll to PW106 Scaler Menu Page 2-3 options
1 Repeat the above mentioned step 1 to 2
2 Press ▲▼ to scroll to PW106 Scaler Menu Page 2-3 options
3 Press◄,►to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings
4 Press to save the new settings and exit. [Don’t adjust others settings in page 2-3]
4 Press to save the new settings and exit. [Don’t adjust others settings in page 2-3]
YCbCr & YpbPr of COMPONENT 1, 2 WHITE BALANCE/BRIGHTNESS/CONTRAST ADJUSTMENT
Getting COMPONENT-1 connect to 1080i signal. (The settings could not be saved if signals input from COMPONENT 2 or connect to other sources such as 720P, 480P, 480i,etc.
WHITE BALANCE ADJUSTMENT OF Component
1] Repeat the above mentioned step 1 to 2
2] Press ▲/▼ to scroll to PE106 FE ADC page 2-3 options
3] Press◄/►to adjust the Offset Red and Off Blue settings.
4] Press◄/►to adjust the Offset Green setting.
5] Press ◄/► to adjust the Gain Green setting.
6] Press◄/►to scroll to 480i/480P/720P Parameter=1080i setting and press ► to run the setting. (This procedure will copy the setting of 1080i to 480i/480P/720P)
7] Press EXIT to save the new settings and exit.
2] Press ▲/▼ to scroll to PE106 FE ADC page 2-3 options
3] Press◄/►to adjust the Offset Red and Off Blue settings.
4] Press◄/►to adjust the Offset Green setting.
5] Press ◄/► to adjust the Gain Green setting.
6] Press◄/►to scroll to 480i/480P/720P Parameter=1080i setting and press ► to run the setting. (This procedure will copy the setting of 1080i to 480i/480P/720P)
7] Press EXIT to save the new settings and exit.
WHITE BALANCE ADJUSTMENT OF PC INPUT
1.Connecting to VGA Timing mode
2.Under service mode, Press▲▼to scroll to PE106 FE ADC page 2-2 options
3.Press ►◄ to adjust the Offset Red, Offset Green and Off Blue settings.
4.Press ►◄to adjust the Gain Red and Gain Blue settings.
5.Press EXIT to save the new settings and exit.
1.Connecting to VGA Timing mode
2.Under service mode, Press▲▼to scroll to PE106 FE ADC page 2-2 options
3.Press ►◄ to adjust the Offset Red, Offset Green and Off Blue settings.
4.Press ►◄to adjust the Gain Red and Gain Blue settings.
5.Press EXIT to save the new settings and exit.