Amira 15 LCD 38-6605 BS GBE4800
Amira 17 LW 45-6605 BS GBE4700
Amira 20 LCD 51-6605 BS GBE4600
Davio 20 LCD 51-4505 Top GBE5600
Lenaro 20 LCD 51-7606 Top GBD2600
Monaco 20 LCD 51-9622 DL GBE4000 LCD 51-9622 DL GBF0300
Vision 20 LCD 51-8610 Top GBE3800 LCD 51-8610 Top GBF0800
Xephia 15 LCD 38-5501 Top GBE4900L5C CHASSIS
i => Call up the Dialog Center
OK => Call up the Service Menus
P+/P– => Call up the dialogue line (point of menu)
Right/Left => Changing the settings
TXT => Exit the Service Mode.SERVICE MODE
- Press button "i " (INFO Menu).
- Enter the code number "8500". The Service Menu "OPTIONS" and the software version number are shown on the screen.
- Step by step call up the Service Menu "ADJUSTMENTS" and "SELECTIONS" with the button "OK" .
- Exit the Service Mode. Press button "TXT"
MAIN BOARD CHANGE
After changing the Main Board or U201 all basic settings in the service mode must be done according to the table.
Software Version Number
The software version number is shown on the upper part of the service menu, e.g.:
L5CGNA_V1.38 - 14.04.2006
SLC 20G-SH01-T 38 -S 6
VCTI V 8 1
PVCS V 38Basic Settings: The table shows all basic specific settings in the service mode.
CLICK ON TABLE TO MAGNIFY
Programme Search
=>Press button "i " (INFO Menu).
=> Select "SETUP" with the buttons P+ /P–and confirm with button "MENU".
=> Select "STATION SEARCH" with the buttons P+ /P– and confirm with button "MENU".
=> Select the required Country with the buttons P+/P–, Left/Right and confirm with button "OK".
The auto programmer system stops at every station of acceptable reception quality (AFC and coincidence) and stores the station data and the respective standard automatically. The system then continues searching.
Pressing the blue button stops the program search.