PHILIPS BDP3000 SMPS board circuit diagram - changing the DVD region code
You can change the DVD region code only, by the following method. Cannot change the region code for Blu-ray disc. It can be changed only by updating the firmware.To read out the software versions to confirm upgrading
Power on the set and open the tray door.
Press <Home> button on the remote control.
Press <Home> button on the remote control.
Select <Setting>, and then press <OK>
Select <Advanced Setup>, press right cursor to choose <Version Info.>, then press <OK>, the software version and other information will display on the TV screen as below.
Mainboard: XXX.XXX
Driver: XXXXXX XXXXXXXX
BDP 3XXX
MAC:XX-XX-XX-XX-XX-XX[The set must not be power off during upgrading; otherwise the Main board will be damaged entirely]
DVD Region code change
> Power on the set and keep no disc.
> In the Home menu, press <6> <6> <6> <6> button.
> Input below new region number by the remote control, then it will change after restart the player.
[Remark: BD disc region code change only by upgrade software]
SMPS board schematic
Click on the pictures to zoom in