How to enter into the factory mode. [Service Mode]
1.You can press "source-2-5-8-0" to go into factory setting.
Press the key "exit" to shut the factory setting.
content:
1: ADC setup: set ADC value of YUV,VGA. It can also be auto-set. Adopt 100% color bar to yuv and Checkerboard signal to VGA.
2: Adjust the brightness and contrast ratio of each signal, which do not affect the value of user's menu.
3: adjust the color temperature and white balance of each signal source.
4: SSC to adjust the spectrum for passing the EMC test.
5: special set
1) 2hour off-- for Aging test
2) WDT --watch dog
3) white pattern --set pure color output for the panel, used at the checking and aging test for panel.
4) reset
5) set the recorder
6) set power-on screen display.
6: QMAP adjust :adjust color quality.
7: PEQ set sound EQ
8: SW information: to check the sofeware information
9: UART DEBUG : Access to serial port and connect a computer if set to HK.
10: BMTEST :cpu check the CPU
The last line is SW Ver.No
![]()
1.You can press "source-2-5-8-0" to go into factory setting.
Press the key "exit" to shut the factory setting.
content:
1: ADC setup: set ADC value of YUV,VGA. It can also be auto-set. Adopt 100% color bar to yuv and Checkerboard signal to VGA.
2: Adjust the brightness and contrast ratio of each signal, which do not affect the value of user's menu.
3: adjust the color temperature and white balance of each signal source.
4: SSC to adjust the spectrum for passing the EMC test.
5: special set
1) 2hour off-- for Aging test
2) WDT --watch dog
3) white pattern --set pure color output for the panel, used at the checking and aging test for panel.
4) reset
5) set the recorder
6) set power-on screen display.
6: QMAP adjust :adjust color quality.
7: PEQ set sound EQ
8: SW information: to check the sofeware information
9: UART DEBUG : Access to serial port and connect a computer if set to HK.
10: BMTEST :cpu check the CPU
The last line is SW Ver.No
LOCK MENU
You can lock system, set password, block program and set parental guidance Once you set the lock system to on, you cannot search the channels or change any programs. The default pass word is 6666.
Block program: Press Up/Dn to choose the program ,press teletext green button to block the program. If you want unblock the program, enter the main menu , input the password, then press green button again.
Block program: Press Up/Dn to choose the program ,press teletext green button to block the program. If you want unblock the program, enter the main menu , input the password, then press green button again.
Parental guidance: Press Left/Right to choose rating.]
NOTE
Restore factory default will clear all the programs and password.
How to update software
Haier MSD306 F/W upgrade with USB SOP
Ready for F/W Upgrade
1 Prepare a USB memory .
2 Copy the software fle (merg.bin) from your computer to the USB memory, and remove it from computer’s USB port.
1.F/W Upgrade.
Ready for F/W Upgrade
1 Prepare a USB memory .
2 Copy the software fle (merg.bin) from your computer to the USB memory, and remove it from computer’s USB port.
1.F/W Upgrade.
2, then input USB , press "MENU" and choose "update software", and then press "OK".
3, Now you should choose "Yes", TV begin to update. You should reset TV after update.
Note:When Upgrade on the process, please don’t Power-Off.
HDMI Connections
When the source device(DVD player or Set Top Box) supports HDM
How To Connect
1. Connect the source device to HDMI port of this TV with an HDMI cable (not supplied with this product).
2. No separated audio connection is necessary.
How To Use
If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
Select HDMI input source in input source option of Select Main source menu.
How To Connect
1. Connect the source device to HDMI port of this TV with an HDMI cable (not supplied with this product).
2. No separated audio connection is necessary.
How To Use
If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
Select HDMI input source in input source option of Select Main source menu.
When the source device(DVD player or Set Top Box) supports DVI
How To Connect
1.Connect the source device to HDMI port of this TV with a HDMI-to-DVI cable(not supplied with this product).
2. A separate audio connection is necessary.
3. If the source device has an analog audio output connector, connect the source device audio output to DVI Audio In port located on the PC port.
How To Use
If the source device supports Auto DVI function, the output resolution of the source device will be automatically set to 1280x720p.
How To Connect
1.Connect the source device to HDMI port of this TV with a HDMI-to-DVI cable(not supplied with this product).
2. A separate audio connection is necessary.
3. If the source device has an analog audio output connector, connect the source device audio output to DVI Audio In port located on the PC port.
How To Use
If the source device supports Auto DVI function, the output resolution of the source device will be automatically set to 1280x720p.
If the source device does not support Auto DVI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
Press the INPUT button to select HDMI input source in input source option of Select Main source menu.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
Press the INPUT button to select HDMI input source in input source option of Select Main source menu.
Universal remote control set-u codes for AWA TVs
0018 0049 0101 0131 0152 0161 0181 0193 0194 0195 0226 0320 0379 0426 0433 0465 0601 0616
0018 0049 0101 0131 0152 0161 0181 0193 0194 0195 0226 0320 0379 0426 0433 0465 0601 0616