- Press ‘Menu’
- Dial ‘6483’ by remote control.
- Press ‘Mute’ to display a Horizontal Line on screen.
- Use [1 & 4] digit keys to adjust R-cut.
- Use [2 & 5] digit keys to adjust G-Cut
- Use [3 & 6] digit keys to adjust B-Cut
- To exit service mode, press ‘Mute’ button.
For a second time press of ‘Display’ key, will enter into F1 mode.
- Press [Ch+] / [Ch -] key to select an item to adjust.
- Press [Vol+] / [Vol-] key to adjust the data value to selected item.
- Press ‘Sleep’ button to display Chip’s inner 6 kinds of test signals.
- To exit, press ‘Display’ key.
SETTINGS
OSD | DESCRIPTIONS | RECOMMENDED DATA VALUE |
RC | R-CUT | 80 |
GC | G-CUT | 80 |
BC | B-CUT | 80 |
GD | G-DRIVE | 64 |
BD | B-DRIVE | 64 |
SB | ====== | ===== |
U.BLK | U SIGNAL BLACK LEVEL | 8 |
V.BLK | V SIGNAL BLACK LEVEL | 8 |
LOGO
- Select A/V mode, and dial ‘6568 to get ‘Logo’ display on screen.
- Press ‘Vol+’ to get ‘Logo-1’.
- By pressing V + N to shift the cusor, and press [P- / P+] to change the character.
- To exit, press ‘Display’ key.
OSD | DESCRIPTIONS | DATA |
H-PHASE | Horizontal Phase for 50 Hz | 18 |
V.SIZE | Vertical amplitude for 50Hz. | 18 |
V.POS | Vertical Phase for 50Hz | 2 |
V.LIN | Vertical linearty | 17 |
V.SC | Vertical S-Correction | 15 |
HBOW | H bow correction | 4 |
HPARA | H para correction | 4 |
H.BLK.RIGHT | H.Right blanking | 0 |
H.BLK.LEFT | H.Left blanking | 0 |