- Press the 2 juts and pull out the Stand as shown.
- Loosen 5 screws A and 6 screws B to remove the Rear Cabinet.
- Loosen 3 screws C to remove the SP & ANT Jack Board.
- Loosen 5 screws D to remove the Power Module.
- Loosen 2 screws E to remove the Bracket Jack Board as shown.
- Loosen 3 screws F to remove the Main Board.
DISASSEMBLY OF DISPLAY LENS & VOLUME KNOB
- Use a flat head screwdriver to give a push in the direction as shown.
- Place two small screwdrivers in between the front cabinet & knob to give more leverage in pulling out the Volume Knob as shown.
CD MODULE & CD DOOR CARRIER DISASSEMBLY
- Loosen 5 screws J mounting the Key Board to the Front Cabinet to remove the Key Board.
- Loosen 4 screws H and 3 screws G to CD Module as shown.
- Loosen 2 screws I to remove the Servo Motor Mechanism.
- Loosen 4 screws K to remove the Right CD Door Carrier and 4 screws L to remove the Left CD Door Carrier.
Service Position
After re-assembly, it is very important to ensure all wires are routed properly to ensure that they do not touch/obstruct all moving parts.
MAIN POWER - SCHEMATIC
![]()
MAIN POWER - SCHEMATIC
Click on pictures to Magnify