System, Region Code, etc. Setting Procedure
Restore factory setting
a)Press <SETUP> button on R/C
b) Select <preference setup> ,then press < OK >
c) Select <default>,then press <OK> to confirm.
Version control change
a) Open the Door , and then press “1” “5” “9” on RC
b) Press <OK> button on RC
c) TV will show message as follow:
Password change
a) Press <SETUP> button on R/C
b) Select <preference setup> ,then press <OK>
c) Select <password> <change>then press <OK> to confirm
“0000” is default password supplied.
Trade model
a) Press <Open/Close>button on R/C
b) Press “2” “5” “9” on R/C,VFD will display “TRA ON “ or “TRA OFF“
Check on software version
a) Press <SETUP> button on R/C
b) Select <preference setup> ,then press <OK>
c) Select <version info>then press <OK>
d) TV will show message as follow:
Upgrading new software
a) Copy the latest upgrading software onto a CD-R or USB storage device
b) Insert the CD-R program disc or connect the USB storage device to the home theater
c) TV will show message.
d) Select <OK>,the home theater will start to upgrading automatically.
Note: when upgrade in progress, please do not unplug or switch off the device. when the updated is complete ,the home theater automatically switch to standby.
[Only a qualified service person should reprogram the Region Code.]
Wiring diagram
Display board schematic and PWB
Circuit diagram [Schematic]
Power supply [SMPS] schematic and PWB
TAS 5152: Digital power amplifier schematic
