When a program is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. Attach an RS-232C cable cross-type (commercially available) to a 9 pin D-sub/MINI-DIN (optional:AN-A1RS) for the connections.
NOTE:A person who is accustomed to using PCs should use this operation system.
Communication conditions
Set the RS-232C communications settings on the PC to match the TV’s communications conditions. The TV’s communications settings are as follows:
- Baud rate: 9,600 bps
- Data length: 8 bits
- Parity bit: None
- Stop bit: 1 bit
- Flow control: None.
Communication procedure
Send the control commands from the PC via the RS-232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command.
COMMAND FORMAT
PARAMETER
Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that four values are input for the parameter.)
When the input parameter is not within an adjustable range, “ERR” returns.
COMMANDS
CLICK ON PICTURES TO ZOOM IN
NOTE:
If an underbars (_) appears in the parameter column, enter a space.
If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.