{CLICK ON PICTURES TO ZOOM IN}
COMPONENT SIDE
PASSWORD RESET
Change the password (default is ‘1111”).
Follow the instructions on the screen. Once changed, please remember your own password. If you have forgotten your password, please do the following:
- “POWER (OFF) = MENU => V-CHIP => MUTE” to revert to the default password of 1111.
- Press Number key 100 => 9 => 9 => 1 into Engineer Mode.
- Press menu key repeat to “ADC “page, then select “EPinit” and press “right” key to initial EEPROM.
- Press Number key 100 => 9=> 9 => 9 into the Factory Mode.
Universal Remote Control Set-up Codes
GE : 0216 0043 0056 1027 [043, 216]
RCA RCR 311W: 1203 1207, 1222
RCA RCR 312W: 10748, 10824 11610, 11144, 11240, 11331