DISPLAY OF SOFTWARE VERSION NUMBER
- Press one after the other the “STOP” and “EJECT” buttons on the unit.
- Press the“OSD” with the remote control.
- Using the cursor buttons on the remote control, select the software version “MICRO Version” or “CUSTOMER VERSION” .The respective software version number then is displayed.
SOFTWARE UPDATE
- Create a software upgrade CD
- Use only a new CD-R/CD-RW (not an erased one).
- Give the CD a name of your choice (e.g. version and unit name).
- Burn the unpacked documents on the CD-R/CD-RW.
- The root directory (uppermost level) of the software upgrade CD
- Attention: If a failure should occur during the software upgrade (e.g. a mains failure), it may happen that the unit’s function and a restart of the upgrade function are no longer possible. If this should be the case, you must replace the intergraded FLASH ICs with preprogrammed ICs.
- Insert the upgrade CD (see corresponding spare parts list) and observe the hints on the display and on the screen of the TV set.
- Carry out an initialization of the set.