- In the condition of NO indication on the screen.
- Press the VOL. DOWN button on the set and the Channel button (9) on the remote control for more than 1 second to appear the adjustment mode on the screen.
- Use the Channel UP/DOWN button or Channel button (0-9) on the remote control to select the options.
- Press the MENU button on the remote control to end the adjustments.
FUNCTIONS
RF-AGC DELAY
- Receive an 60dB monoscope pattern.
- Connect the digital voltmeter to TP001 (R606).
- Activate the adjustment mode display and press the channel button (02) on the remote control to select "RF AGC DELAY".
- Press the VOL. UP/DOWN button on the remote control until the digital voltmeter is 2.65 ±0.05V.
CUT-OFF
Adjust the unit to the following settings.- R.DRIVE=73, B.DRIVE=61, R.BIAS=88, G.BIAS=74, B.BIAS=73, BRIGHTNESS=124, CONTRAST=100
- Place the set with Aging Test for more than 15 minutes.
- Activate the adjustment mode display and press the channel button (01) on the remote control to select "CUT OFF".
- Adjust the Screen Volume until a dim raster is obtained.
WHITE BALANCE
NOTE: Adjust after performing CUT OFF adjustment.- Place the set with Aging Test for more than 10 minutes.
- Receive the color bar pattern.
- Using the remote control set the brightness and contrast to normal position.
- Activate the adjustment mode display and press the channel button (10) on the remote control to select "R.BIAS".
- Using the VOL. UP/DOWN button on the remote control, adjust the R.BIAS.
- Press the CH. UP/DOWN button on the remote control to select the "R.DRIVE", "B.DRIVE", "G.BIAS" or "B.BIAS".
- Using the VOL. UP/DOWN button on the remote control, adjust the R.DRIVE, B.DRIVE, G.BIAS or B.BIAS.
- Perform the above adjustments 6 and 7 until the white color is looked like a white.
SUB TINT / SUB COLOR
- Receive the color bar pattern. (RF Input)
- Connect the oscilloscope toTP023.
- Activate the adjustment mode display and press the channel button (16) on the remote control to select "TINT".
- Press the VOL. UP/DOWN button on the remote control until the section "A" becomes as straight line.
- Connect the oscilloscope to TP- 022.
- Press the CH DOWN button once to set to "COLOR" mode.
- Press the VOL. UP/DOWN button on the remote control until the red color level is adjusted to 110% of the white level
- Receive the color bar pattern. (Audio Video Input)
- Press the TV/AV button on the remote control to set to the AV mode. Then perform the above adjustments.
Universal remote control set-up codes
With GE remote control: 1091 0004 0009 0049 0051 0135 0031 0000 0268 0310 0001 {000, 001, 004, 006, 009, 031, 046, 049, 051, 082, 083,
135, 162, 268, 310}
RCA RCR 311W: 1004, 1006, 1013, 1019, 1047, 1054, 1163, 1167, 1205, 1207, 1213, 1230
RCA RCR 312W: 10154, 10463, 10150, 10178, 10016
6-IN-1 Universal remote: 014,022,062,095,096