- Loosen 4 screws as red circles.
- Pull the Interface module to the right side and pull up as blue arrow.
- Loosen 5 screws as red circles.
- Loosen Tuner nut as blue circles.
- Loosen 4 screws as red circles.
- Take apart AV cover metal and Interface Board.
STAND MODULE
- Loosen 7 screws as red circles.
- Take apart the Stand Module.
- Loosen 7 screws as red circles.
- Take apart the Stand Cover and Stand Support Metal.
- Loosen 4 screws as blue circles.
- Take apart the Stand Bottom Metal and Stand Support Metal.
{CLICK ON PICTURES TO ZOOM IN}
BACK COVER
- Loosen screws as red circles.
- Take apart the Back Cover from TV.
SYSTEM BOARD
- Loosen 8 screws as red circles ofFigure1, the screw locations are around the Shielding, every side has 2 screws.
- Loosen 1 screw as blue circles.
- Take apart the shielding.
- Pull out of all wires.
- Loosen 4 screws as red circles.
- Take apart the System Board.
POWER MODULE
- Pull out the power wires with Panel Inverter connector and System board connector as red arrows.
LCD PANEL
- Loosen 10 screws marked in blue circles.
- Loosen 4 screws as red circles.
- Loosen 4 screws as blue arrows and blue circles.
- If you take off the System Board and Power Supply before, you can direct take apart the Panel.
- Be careful to take panel.
- Loosen 10 screws marked in blue circles.
- Loosen 4 screws marked in red circles.
- Loosen 4 screws as blue arrows and blue circles.
- If you take off the System Board and Power Supply before, you can direct take apart the Panel side up as blue arrow.
- Pull out the LVDS wire and Power wire.
- Take apart the Panel Module.
