Design Mode
- Select the Service mode {Visit previous post here for details}
- While pressing CALL button on Remote and press MENU button on TV.
- The following displays are shown on the screen.
When QA02 is initialized, item “OPT3" of DESIGN MODE is set to the data of the representative model of this chassis family. Therefore, because ON-SCREEN specification remains in the state of the representative of model. This model is required to reset the data of item “OPT3".
SELECTING THE ADJUSTING ITEMS
Every pressing of CHANNEL ▼ button in the design mode changes the adjustment items. (▲button for reverse order).
ADJUSTING THE DATA
Pressing of VOLUME ▲/▼ button will change the value of data.
ADJUSTING ITEMS AND DATA IN THE DESIGN MODE:
CLICK ON CHARTS TO ZOOM