- Remove the hand screw from the finisher connection connector on the rear side of the machine, and remove the machine connection harness from the finisher.
- Open the front cover of the finisher.
- Turn the separation lever to the left to separate the finisher from the machine. Slide the finisher to the left until it stops.
- While pushing the lock lever to the bottom, slide the finisher a little to release the lock.
- Remove the finisher from the machine connection unit.
PAPER PASS UNIT
Remove the screw, and remove the paper pass unit.
UPPER PAPER GUIDE
Remove the screw, and slide the finisher upper paper guide to the front side to remove.
FRONT CABINET - RIGHT
Remove the screw, and remove the separation lever.
Remove the screw, and remove the front cabinet right.
REAR CABINET & IF MAIN PWB COVER
Remove the screw, and disengage the pawl and remove the rear cabinet.
Remove the screw, and slide the IF main PWB cover to the front side to remove.
