- Connect the download jig to D-sub(RGB) jack.
- Execute ‘ISP Tool’ program, the main window (Mstar ISP utility Vx.x.x) will be opened.
- Click the “Connect” button and confirm “Dialog Box”
- Click the “Config.” button and Change speed I2C Speed setting : 350 Khz ~ 400 Khz.
- Read and write bin file. Click “(1)Read” tab, and then load download file (XXXX.bin) by clicking “Read”.
- Click “(2) Auto” tab and set as below.
- Click “(3) Run”.
- After downloading, you can see the “(4) Pass” message.
USING MEMORY STICK
- Insert the USB memory stick to the USB port.
- Automatically detect the SW Version. à S/W download process is executed automatically.
- Show the message “Copy the file from the Memory.
- After Finished the Download, Automatically DC Off àOn.
- Check the update SW Version.
