- Turn off the power switch at the right side of the display.
- Wait for about 5 seconds and press MENU, POWER switch within 1 second interval.
- The SVC OSD menu contains additional menus that the User OSD menu as described below.
- CLEAR ETI => To initialize using time.
- Auto Color => W/B balance and Automatically sets the gain and offset value. (press key for over 3 sec)
- AGING => Select Aging mode(on/off).
- Module => To select applied module.
- NVRAM INIT => EEPROM initialize.(24C16, press key for over 3 sec)
- R/G/B-9300K => Allows you to set the R/G/B-9300K value manually.
- R/G/B-6500K => Allows you to set the R/G/B-6500K value manually.
- R/G/B-Offset => Allows you to set the R/G/B-Offset value manually.(Analog Only)
- R/G/B-Gain => Allows you to set the R/G/B-Gain value manually.(Analog Only)
POWER SUPPLY BOARD [SCHEMATIC]
POWER SUPPLY BOARD
ADJUSTMENT
Operating System: MS Windows 98, 2000, XP
Port Setup: Windows 98 => Doesn’t need setup. Windows 2000, XP => Need to Port Setup.
This program is available for LCD Monitor only.
PORT SETUP
- Copy “UserPort.sys”file to “c:\WINNT\system32\drivers”folder
- Run Userport.exe
- Remove all default number
- Add 300-3FF
EDID READ & WRITE
- Run WinEDID.exe
Edit Week of Manufacture, Year of Manufacture, Serial Number
- Input User Info Data
- Click “Update”button
- Click “Write”button
