MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be adjusted by remote control in Service Mode.
SERVICE - 1
- In sound menu, set BASS to MAXIMUM, and set TREBLE to MINIMUM.
- Simultaneously press INDEXbutton on remote control and DOWNbutton on the TV set.
- Set the channel to CH99.
- Press HOLD button on remote control.
- To exit to Service mode, press NorPower button on remote control.
SERVICE 1, 2 - AND KEY COMMANDS
Click on tables to Zoom. Click ß at the top left of the browser, to come back.
Option Code Setting (17 inch model)If the memory IC (IC1004) or DG Board is replaced, option code should be re-memorized.
Spare part of IC1004 is already memorized all Data for TX-17LA1M.
If you use for other model, you should re-memorized the different option code in SERVICE 2 mode.
Option Code Setting (20 inch model)
If the memory IC (IC1004) or DG Board is replaced, option code should be re-memorized.
Spare part of IC1004 is already memorized all Data for TX-20LA1M.
If you use for other model, you should re-memorized the different option code in SERVICE 2 mode.
OPTION DESCRIPTION
TX-17LA1M
