1. Factory Mode
Turn on the TV. Press menu key and then press number key 1+9 +9+9+back. It will achieve the factory mode.
2. ADC Adjustment (It’s no need to adjust ADC.)
3. White Balance Adjustment
(1) Enter into the factory mode :(same as the above-mentioned).
(2)Take an example of adjust Ypbpr source.
a. Select item “Source”: Ypbpr and item “Color Temp”: Normal, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (COMPONENT mode: TIM = 314; PAT = 141(80IRE))
b. Select item “Source”: Ypbpr and item “Color Temp”:Warm, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (COMPONENT mode: TIM = 314; PAT = 141(80IRE))
c. Select item “Source”: Ypbpr and item “Color Temp”: Cool, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (COMPONENT mode: TIM = 314; PAT = 141(80IRE))
(3) Take an example of adjust VGA Normal:
a. Select item “Source”: VGA and item “Color Temp”: Normal, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (VGA mode: TIM = 137; PAT = 141(80IRE)
b. Select item “Source”: VGA and item “Color Temp”: Warm, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (VGA mode: TIM = 137; PAT = 141(80IRE)
c. Select item “Source”: VGA and item “Color Temp”: Cool, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (VGA mode: TIM = 137; PAT = 141(80IRE)
(4)Take an example of adjust AV Normal:
a. Select item “Source”: AV and item “Color Temp”: Normal, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (AV mode: TIM = 303; PAT = 141(80IRE)
b. Select item “Source”: AV and item “Color Temp”: Warm, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (AV mode: TIM = 303; PAT = 141(80IRE)
c. Select item “Source”: AV and item “Color Temp”: Cool, Adjust gain of RGB to meet spec in the below setting of Tim/pat. (AV mode: TIM = 303; PAT = 141(80IRE)
(5) Take an example of adjust HDMI Normal:
a. Select item “Source”: HDMI and item “Color Temp”: Normal, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (HDMI mode: TIM = 347; PAT = 141(80IRE) b. Select item “Source”: HDMI and item “Color Temp”: Warm, Adjust gain of RGB to meet spec in the below setting of Tim\pat. (HDMI mode: TIM = 347; PAT = 141(80IRE)
c. Select item “Source”: HDMI and item “Color Temp”: Cool, Adjust gain of RGB to meet spec in the below setting of Tim/pat. (HDMI mode: TIM = 347; PAT = 141(80IRE)
CLICK ON THE TABLES TO MAGNIFY
Note: all models of color temperature within specification, but also ensure the brightness conform to engineering specification.
FIRMWARE UPGRADE
- Press “menu+1999” into factory menu set USB update options to “ON”
- AC on (Power plug)
- Plug the USB disk on the USB port on the side I/O port of TV.
- TV AC power off à AC power on
- TV will upgrade by itself after detect the USB disk condition and the content of the pkg file.
- When firmware update OK, the TV will display “firmware update finished”.
- Remove USB disk from TV.
- Check if the software version is correct.
- Do factory reset in user menu.
- Reset finish, AC OFF.