The inserting method of Region Code after replacing the Main PBA
When replacing the Main PBA and System Micom should be inserted the region code.
The set is not working properly if you don't insert the region code.
The region code is inserted by the remote control.- Press the “AUX” button on the remote control
- Press the “ANGLE” button on the remote control during 4~5 seconds.
- After step (2), you can see “TEST − −” on the VFD. Insert number “33”, “33” to select Region Code.
- After step (3), you can see “− −” on the VFD. Insert the Region Code corresponding model with “0 ~ 9” buttons on the remote control.
- Turn the Power off.
REGION CODE OPTIONS
![]()
CLICK ON THE TABLE TO ZOOM IN