Before putting unit into the service mode, check that customer adjustments are in the normal mode. Use the reset function in the video adjustment menu to ensure customer controls are in their proper (reset) position.
Service Number Selection
Once in the service mode, press the Ch ▲/▼ button on the remote controller or at the set. The service adjustment number will vary in increments of one, from "S01" to "G06". Select the item you wish to adjust.
Data Number Selection
Press the Vol ▲/▼ button to adjust the data number.
To enter the service mode and exit service mode.
While pressing the Vol ▲ and Ch ▲ buttons at the same time, plug the AC cord into a wall socket. Now the TV set is switched on and enters the service mode.
To exit the service mode, turn the television off by pressing the power button.SERVICE MODE SCREEN
Now hold down both the CH UP and CH DOWN keys of the unit for 2 seconds or longer. the default values are written in the EEPROM.
DEFAULT DATA VALUES
CLICK ON THE TABLES TO ZOOM IN
