CLICK ON THE SCHEMATIC TO ZOOM IN
TRADE MODE
In the TRADE mode, the tray open/close function is stopped temporarily.
Setting TRADE mode
- Connect the power cable of the main unit to the AC outlet.
- Press the “POWER ON/OFF” key of the main unit and press the “STANDBY/ON” key of the main unit or remote controller to turn on the power.
- Press the “OPEN/CLOSE” key of the main unit to open the tray.
- Place a disc in the tray and open the “OPEN/CLOSE” key of the main unit to close the tray.
- While pressing the “SKIP+/SEARCH+” key of the main unit and press the “STOP” key for 3 seconds or longer.
- When the TRADE mode is set, [TRADE ON] is displayed which then returns to the normal display.
Press the “OPEN/CLOSE” key, and [TRAY LOCKED] is displayed
Canceling TRADE mode
- With a disc set in the tray, while pressing the “SKIP+/SEARCH+” key of the main unit and press the “STOP” key for 3 seconds or longer.
- When the TRADE mode is cancelled, [TRADE OFF] is displayed which then returns to the normal display.
- When no picture is displayed even though the main unit and TV monitor are connected with the HDMI cable
- Press the “STOP” key of the main unit or on the remote control twice.
- While pressing the “STOP” key of the main unit, press the “PLAY” key for 3 seconds or longer. [HDMI RESE] is displayed of the main unit, which then returns to the normal display.
When no picture is displayed or picture is displayed but not properly even though the main unit and TV monitor are connected with the video pin cable or the like
- Press the “EJECT” key to open the tray.
- Press the “CLEAR” key on the remote control.
- Press the “2”, “5”, “8”and “0”keys on the remote control.
- Press the “AUDIO” key on the remote control.