JG201 Serial Communication Change JIG
JG176 EU LCD MICON VER UP ROM DISC DTV ROM DISC
JG212 EEPROM DISC
JG204 MICON UPDATE TOOL DISCRef. No. | Part No. | Parts Name | Remarks |
JG176 | APJG176133 | EU LCD MICON VER UP ROM DISC | Up-Date of the VCTP DATA |
JG176 | APJG176130 | DTV ROM DISC | Up-Date of the Digital Soft Firmware |
JG212 | APJG212001 | EEP ROM DISC | Up-Date of the EEPROM DATA |
JG201 | APJG201000 | Serial Communication Change JIG | Connect the set to personal computer. |
JG203 | APJG203000 | MICON PROGRAM JIG KIT 25-4 | Connect the set to personal computer. |
JG204 | APJG204000 | MICON UPDATE TOOL DISC | There is WRITING TOOLS in Disc. |
- Set the MICON UPDATE TOOL DISC (JG204) to PC.
- Install the LPT driver.
Windows 95/98 : Setup_LptDrv_v0104_9x.exe
Windows 2000/XP : Setup_LptDrvDev_v020201_XP_2000.exe
Windows NT : Setup_LptDrv_v0104_NT.exe
- Re-boot the PC.
- Install the “Setup_Visual_I2C_v3-2-3b8h.exe”, “Setup_VI2C_for_VCT_Pro_v0101.exe” and “Winupload 4.4.3.exe”.
RE-WRITE FOR DIGITAL SOFTWARE
- Unplug the AC cord, and remove the back cabinet.
- Using the Serial Communication Change JIG (JG198) and RS232 Cable, connect the PC terminal and UART Connector(CP2402) on the DIGITAL PCB Ass'y.
- Connect it in order of Digital Pcb => Serial Communication Change JIG(JG198) => RS232 Cable => PC
- Insert the AC cord, turn on the power.
- Press both VOLUME DOWN button on the set and Channel button (2) on the remote control for 2 seconds.
- Confirm that displayed software version.
- Set the Standby mode.
- Set the DTV ROM DISC(JG176) to PC
- Start the "Winupload"(Writing tool).
- Select the "Port Setting" from Process menu, then please set it as follows. NOTE: This step is not necessary from next time.
- Select the "Connect" from File menu.
- Select the "Upload" from Process menu, and select the Software(CB00C75091.urt) in DTV ROM DISC(JG176).
- Unplug the AC cord on the set, then plug it in again.
- Turn on the power. The following window will appear, Up-date for Software will start. "Uploading in progress" bar will begin to move.
- When the "Uploading inprogress" bar reaches a right edge, the Writing for Digital Soft Firmware will start. During the writing for Digital Soft Firmware, writing message will appear on the screen. Finish the writing for Digital Soft Firmware, writing message will disappear.
- Unplug the AC cord, and remove the Serial Communication Change JIG(JG198).
- Insert the AC cord again.
- Turn on the power.
- Press both VOLUME DOWN button on the set and Channel button (1) on the remote control for 2 seconds. The set will turn into the standby mode.
- Turn on the power.
- Press both VOLUME DOWN button on the set and Channel button (2) on the remote control for 2 seconds. When the changed version displays, the Re-write will be completed.
- Select the "Disconnect" from File menu.