- Standby mode (power off).
- Press the buttons on the remote control [DISPLAY >CHANNEL-5 > VOLUME +> POWER] (On the Remote Commander (press each button within a second). The CRT displays the item being adjusted.
- Press [1] or [4] on the Remote Commander to select an item.
- Press [3] or [6] on the Remote Commander to change the data.
- Press [MUTING] then [ENTER] to save into the memory.
- Press [8] then [ENTER] on the Remote Commander to initialize. Carry out this step when adjusting IDs 0–4 and when replacing and adjusting IC1003.
- Turn set off then on to exit service adjustment mode.
** VSS = 1 for US & CND, VSS=0 for Other
*** CDMD= 3 for US & CND, CDMD = 0 for Other
**** KV-21FE12A,KV-21FE12C,KV-21FV12C=1; Others =0
*****BBE HIGHFIX DATA: KV-21FV12/21FV12C= 8; Others = 4
No. 1–100 show the order that each adjustment mode may be selected while in service mode. Data Range shows the range of possible settings for each adjustment mode. Initial Data shows the standard settings for each adjustment mode.
ADJUSTMENT ITEMS
CLICK ON THE TABLES TO MAGNIFY
ID MAP
