For easy servicing of a TV set, the set should be put face down on a soft flat surface, foam buffers or other specific workshop tools. Ensure that a stable situation is created to perform
Assy/Panel Removal
Instructions below apply to the 40PFL3606D/78, but will be similar for other models.
Rear Cover
Remove fixation screws [2] and [3] that secure the rear cover. It is not necessary to remove the stand first.
Lift the rear cover from the TV. Make sure that wires and flat foils are not damaged while lifting the rear cover from the set.
Remove the Stand [A].
Remove the Speakers/Subwoofer [B].
Remove the PSU [C], SSB [D] and TCON (E).
Remove the IR/LED board [F].
Remove the Local Control board [G].
Remove the clamps [1].
Remove all metal subframes [2] that do not belong to the LCD display.
CLICK ON THE PICTURES TO ZOOM IN