Checking the LCD TV Firmware Version Follow these steps:
- Turn on the LCD TV.
- Press and hold the [ – ]button on the TV, and at the same time, press and hold the [8] button on the remote control.
- After at least 2 seconds, release the buttons to display the firmware information.
- Press EXIT/CANCEL on the remote control to close the window.
UPDATE PROCEDURE
- Plug in a USB drive with the new firmware. The below window appears.
- Highlight Yes and then press ENTER on the remote control. The MCU firmware update begins.
- After the MCU firmware completes, the below window appears.
CLICK ON THE PICTURES TO MAGNIFY
- Highlight Yes and then press ENTER. The SYS firmware update begins.
- After the SYS firmware update completes, the below window appears.
- Remove the USB drive from the USB service port, and then press ENTER. The below window appears.
- Press ENTER to reboot the LCD TV.
Checking the DVD Firmware Version
Follow these steps:
1. Turn on the LCD TV.
2. Press TV/DVD on the remote control to switch to DVD mode.
3. Press and hold the STOP button on the LCD TV, and at the same time, press and hold the 1button on the remote control.
4. After at least 2 seconds, release the buttons to display the firmware information.
Updating the DVD Firmware
Follow these steps:
1. Turn on the LCD TV.
2. Press TV/DVDon the remote control to switch to DVD mode.
3. Insert the disc with the new firmware.
4. After the DVD firmware update completes, the “Update is successful” message appears on the screen. After a few seconds, the DVD firmware information will be displayed.
5. Press EXIT/CANCEL on the remote control to close the window.