CLICK ON THE PICTURES TO MAGNIFY
The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit(IEC60950 or UL1950). Do not connect the CCFL to hazardous Voltage Circuit.
Panel Source Identify
(1) ID label - The panel code “Q” for QDI panel and “T” for Hannstar panel should be shown on the lower right side of ID label.
(2) UPC label - The panel code “Q” for QDI panel and “T” for Hannstar panel should be shown on the lower right side of UPC label.
(3) Main board - The panel code “Q” for F/W version sticker or silkscreen should show QDI panel and “T” for Hannstar panel on the main board.
The MB board is a two-layer, single-landed. 12V DC power from the power adapter enters the board through connector CN6. Other connectors on the board are for audio speaker and button board .The VGA cable is a signal cable that contains video signal, sync signal and DDC signal from PC VGA adapter. This system board consists of 4 functional areas: flat panel controller, flash ROM, power regulator and Audio amplifier.
Flat panel controller… NT68563HF (IC2)
The heart of the system board is the scalar chip of NT68563HF. The scaler is a highly integrated flat panel display controller that interfaces analog, digital, and video inputs. It combines a triple ADC, a DVI compliant TMDS receiver, a multi-color on screen display (OSD) controller and many other functions in a single chip. It provides user a simple, flexible and cost-effective solution for various flat panel display products. The NT68563HF operates at frequencies up to 205MHz (analog only), suitable for LCD monitor up to UXGA resolution. The NT68563HF also build-in noise reduction function to provide more stable video quality, spread spectrum to provide low EMI solution, sRGB for video color space convert, post pattern for manufacture test.