- 1st, press menu,
- 2nd, input 8893,
- Finished these operations, system will be into the factory mode menu.
TO EXIT
To exit factory menu, press the button ”Exit” in the remote control.
ADJUSTMENTS
Version, S/N, Panel Resolution
Version: The first line is the model Name and the second line is current software version.
Auto Colour
The option could only be used in the VGA and Component model. When we found the colour in the two models was abnormal. Then we can use the function to adjust it automatically.
Color Temperature
The function could adjust the Colour Temperature., used when debugging.
Audio
Dolby Banner: When turn it “ON”, the model will be in Dolby authentication state.
Compression: Compression style. RF: ATV line: AV/S-Video/YPbPr/VGA
Compression Factor: Compression state.
Downmix: output model. MTS System: used when debugging. The parameters only used when debugging, no need to be modified.
Channel
Range Scan: The function could make it to search the channels by differentiation the analogue and digital channels.
Single RF Scan: Search channels in the frequency scope set in advance.
Factory Scan: According to ANTENNA-ANALOG => ANTENNA-DIGITAL => CABLE- ANALOG => CABLE- DIGITAL to search channels, used only in project debugging.
Tuner Diagnostic: Project debugging setting, used to inspect the audio function.
Gamma: Bright: GAMMA0.8 Middle: default settings in the program Dark: GAMMA1.2
Backlight: adjust the backlight.
Burning Mode: Turn it “ON” to enter the aging model; This is for factory run-in testing. The screen would display red, green, blue and black screen repeatedly. Each colour screen could be exam at that time.
Clean Storage: The function could make the model turn back to the factory default setting.
SETUP CODES
GE => 0081 0216 0217 0157
COMCAST DTA => 11034, 10768, 11009
JUMBO-66687 => 216,217
PHILIPS SRP 3004-10 => 1175