- Disconnect the power cord of PDP.
- Connect the RS232C OUT terminal of your PC to the RS232C IN terminal of your PDP using the RS232C CABLE.
- Copy 3files(appcode.hex, bootcode.hex, flasher.hex) and put them in the program folder.
- Run the download program.
- Click Flash column and select FlashAll.inf
- Check 'Connection' and 'Modes' at the following screen.
- Click Flash to start the upgrade.
- Connect the power cord of PDP then program upgrade run automatically.
- When the program upgrade is complete, then PDP will turn on automatically.
POWER BOARD REPLACEMENT & VOLTAGE ADJUSTMENTS
- When replacing SMPS or PDP panel, check the voltage printed on the panel sticker, and adjust it, if necessary.
