ENTERING CODES MANUALLY [DIRECT CODE ENTRY]
- Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
- Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.
- Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press AUX then the device button you are assigning to AUX. The INDICATOR LIGHT will blink then remain lit.
- Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will turn off.
- Aim the remote at the device (TV, VCR, DVD, etc.) and press the POWER button. Your device should turn off.
Note: If your device does not respond to the first code listed, repeat steps with the next code. If none of the codes listed for your device work for your device or your brand is not listed, try the Code Search method described below.
CODE SEARCH METHOD
- Turn on the device you wish to program.
- Press and hold CODE SEARCH/SETUP until the INDICATOR LIGHT lights, then release.
- Press and release the device button for the device you are programming (TV, VCR,DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device button you are assigning to AUX.
- Press and release POWER until your device turns off. Wait at least 2 seconds between each time you press POWER. Important: You may have to press POWER up to 250 times.
- When your device turns off press the ENTER button (Should your remote model not have an ENTER button, then press the OK button.) The INDICATOR LIGHT will go off.
SLEEP FEATURE [RM94902, RM94904 & RM94905 Models]
- Press and hold the SLEEP button until the INDICATOR LIGHT stays lit.
- Enter time in minutes using the numerical keypad. (Minutes 1-99; press 0 before the actual number).
- Leave remote aimed at television.The Sleep Function will not function properly unless the remote is left aimed at the television.
TO TURN OFF SLEEP FEATURE.
- Press and hold SLEEP until the INDICATOR LIGHT blinks or press the POWER button to turn off the TV.