The error code is automatically display after entering into self-diagnostic mode.
Self-Diagnosis Function provides information on any problems occurring for the unit and its respective components by displaying the error codes. These error code such as U**, H** and F** are stored in memory and held unless it is cleared.
SELF DIAGNOSIS & SPECIAL MODE SETTING
This unit is equipped with functions for checking and inspecting namely: Self-Diagnostic and Test Mode
SPECIAL MODE TABLE
CLICK ON TABLES TO MAGNIFY
ERROR CODES DISPLAY
CRS1 Error Code display
- The errors that occurred in CRS1 Mechanism can be recalled and displayed, in the order of the occurrence under self-diagnostic.
- Only the first 5 errors will be memorized (in backup memory). The subsequence error shall be ignored and not memorize. For system with EEPROM as memory backup, memory space in EPROM is necessary.
- In CRS1 Self-Diagnostic mode, press [SINGLE CHANGE] to display subsequence error code. It shall repeat after reaching error no. 5.
[1____IHMS] =>[SINGLE CHANGE]
[2____ITOP] =>→[SINGLE CHANGE]
[3____HOME] => [SINGLE CHANGE]
[4____LOAD] =>[SINGLE CHANGE]
[5_____UDD] => [SINGLE CHANGE]
To clear the error code memory
- In CRS1 Self-Diagnostic mode, long press [SINGLE CHANGE] key (2s or more)
TRANSFORMER CIRCUIT
POWER CIRCUIT
