- Remove 3 screws at each side and 5 screws at rear panel.
- Lift up both sides of the top cabinet; push the top cabinet towards the rear to remove the top cabinet.
- Remove 6 screws.
- Disconnect cable CN2810 (Fan) at Main P.C.B.
- Remove rear panel.
Disassembly of CD Changer Unit (CRS1)
- Remove 1 screw at rear panel.
- Detach the FFC cables (CN2801 & CN2805).
- Release the claws on both ends.
- Lift the CD changer unit upwards to remove it.
Disassembly of Mecha Chassis.
- Disconnect FFC cables (CN2803, CN2806 and CN2951)
- Detach connectors (CN2808 & CN2809).
- Remove Main P.C.B.
- Disassembly of Transformer P.C.B.
- Disconnect connectors (CN5950 & CN5951).
- Remove 3 screws (Mounting screws for transformer to bottom chassis).
- Push the Transformer P.C.B. sideward to remove it.
- Remove the 4 screws on Power P.C.B.
- Detach cable (CN5950) remove the 5 screws on Power P.C.B.
- Remove Power P.C.B.
- Note: Insulate the Power P.C.B. with insulation material to avoid short circuit.
- Remove 2 screws at the Power Amp IC and/or 3 screws to Voltage Regulator.
