- Press the [ . ] key to select the page.
- Press the “▲/▼” to select the item you desired change, and press the “◄/►”to set the value.
- Press “Exit” to exit the factory menu , the value you have changed will be save automatically.
WHITE BALANCE ADJUSTMENT
- Receive black or white signal under AV or PC mode, adjusting brightness and contrast to set the brightness to 15Nit in dark area and 90 Nit in bright area.
- Adjust white balance. Press[ . ] button to select the page adjusting White calibration.
- Press the ▲/▼to select the item you desired change, and press the ◄/► to set the values as follow.
Green Offset => 1000
Blue Offset => 1000
- Then adjusting Red gain, Green gain, Blue gain” to adjust the chromaticity coordinates of black and white to fit the requirement.