Replacement of the Traverse Deck.
- Remove the CD changer unit.
- Insert the gear with hexagonal wrench into the hole.
- Rotate the hexagonal wrench in the direction of arrow (clockwise), and then open the disc tray fully.
CLICK ON PICTURES TO ZOOM
- With pressing the claw (A), rotate the hexagonal wrench clockwise. (The slide plate R moves for a little amount.)
- Pressing the claw (B) in the direction of arrow (1), the connection lever moves in the direction of arrow (2).
- Lift up the traverse deck ass’y.
- Remove the traverse deck ass’y from the timing lever.
- Remove 3 screws.
- Unsolder the motor terminals (4 points).
- Remove the FFC board from the connector, and then remove the CD Servo P.C.B.
- Remove the pin.
- Release the claw, and then remove the traverse deck ass’y.