Invert the TV, and place screen side down on a soft and flat surface.
Locate the [6*M5X12] screw and mounting points found on the base of the stand and plasma bracket.
Tighten the 6 screws.
Locate the 4 screws and mounting points found on the back of the plasma TV.
Affix and tighten these [4*M5X*12]screws.
CLICK ON PICTURES TO MAGNIFY
SERVICE MODE
Enter service mode menu by follow methods:
[Balance]+[0532]:
- Press [Balance] item, and then press number [0532] button at once.
- WHITE BANLANCE: adjust white balance.
- TELETEX LANGUAGE: 0 West Germany, 1 east Germany.
- PICTURE MODE: adjust picture mode, If you adjust these data, date of all signal picture will increase same data.
- Factory initialization: presetting signal of different country.
- Clear mother chip settings: Don’t usually use it, except that program appears at abnormal. If you clear mother chip, and VGA colour isn't normal. You need auto colour VGA and HDTV, advice service hadn't better use the function.
SERVICE MODE MENU include:
NOTE: It is better amend factory data. Because it is better settings data.
Universal Remote Control Set-up codes
GE=> 0073 0182 0216
RCA RCR 311W => 1138
RCA RCR 312W => 10748
AT&T UVERSE => 1112
URC 3940 => 11363 11314 10208 10009 12098 10508 10860 10753 10698 10821 10891 10780 11170 11208 10556 11074