TO ENTER FACTORY MODE
- Press 'Menu' key.
- Then press "Q view key", "Mute key" in turn on remote control.
- The TV set go to factory mode.
- Press the "Timer" key to go to the next factory menu.
- Go to Menu-5 status by this means.
- Press 'Menu' key to exit the factory mode.
- Press CH ▲/▼ to select items to adjust.
- Press Volume ▲/▼ to change the data value to selected item.
+B ADJUSTMENT
- Disconnect the horizontal load. Connect a 100W bulb [Filament type only] across C321.
- Switch ON the set.
- Test the voltage acorss C321, and adjust it to +110V+/-0.5V by adjusting VR601.
UNIVERSAL REMOTE CONTROL SET-UP CODES
GE: 0049 0110 0268 0180 0012
RCA RCR 311W: 1044, 1047, 1049, 1065, 1129, 1163
RCA RCR 312W: 10154, 10159
6 in 1 SUPER REMOTE: 062,063,064,193
URC 4021: 0154
URC 8080: 154, 159