Quantcast
Channel: Electro help
Viewing all 2033 articles
Browse latest View live
↧

JVC FS-SD5 - FS-SD7 - FS-SD9 - DISASSEMBLE PROCEDURE - COMPACT COMPONENT SYSTEM

May 26, 2013, 10:21 pm
$
0
0


REAR COVER - RIGHT & LEFT COVERS
  • Remove the ten screws A and the five screws B  attaching the rear cover on the back of the body.
  • Remove the four screws C attaching the side covers on the bottom of the body.
  • Move the left cover backward and remove outward.   Also remove the right cover in the same way.
REMOVING THE FRONT PANEL ASSEMBLY
  • Remove the three screws D on the bottom of the body.
  • Release two joints [a] and two joints [b] on both sides of the body using a screwdriver and remove the front panel assembly toward the front.
REMOVING THE CD MECHANISM BASE ASSEMBLY
  • Remove the four screws E attaching the CD door on the upper side of the body.
  • Disconnect the card wire from connector CN104 and CN105 of the main board in the front part of the body. Disconnect the card wire from CN101 of the main board on the right side, and the harness from CN705 and CN708 of the CD mechanism base assembly respectively.
  • Remove the four screws F attaching the CD mechanism base assembly on the upper side of the body. Remove the screw I attaching the earth terminal on the right side.
  • Remove the screw G attaching the heat sink board on the back of the body. Disconnect the harness from connector CN301 and pull the heat sink board fully outward.
  • Raise the right and left door arms by turning the gear a in the rear of the heat sink board.
  • After the CD mechanism base assembly is detached from the door arms, pull the CD mechanism base assembly toward the front and disconnect the harness from connector CN804 on the left side of the door arm board.
  • Pull out the CD mechanism base assembly toward the front.
REMOVING THE DOOR ARM ASSEMBLY | THE DOOR ARM ASSEMBLY BOARD [R] & [L]
  • In case that the upper parts of the door arms attached to the CD door are not level, let down them to the level position by turning the gear a in the direction of the arrow.  ATTENTION: When the door arms incline, the door arm assembly and the door arm board (R) and (L) may not be removed.
  • Remove the four screws H on the upper side and the one screw I on the left side of the body.
  • Remove the four screws J attaching the door arm board (L) and (R) on both sides of the door arm assembly.
REMOVING THE POWER AMPLIFIER BOARD & TRANSFORMER ASSEMBLY
  • Disconnect the harnesses from connector CN102 and CN193 on the main board and release them from the cord stopper respectively.
  • Remove the two screws K and the two screws L attaching the heat sink and the power amplifier board.
  • Disconnect the harnesses from connector CN191 and CN192 on the main board and release them from the cord stopper respectively.
  • Remove the four screws M attaching the transformer assembly.
REMOVING THE GEAR MOTOR ASSEMBLY
  • Disconnect the harness from connector CN106 on the main board and release it from the cord stopper.
  • Remove the three screws N attaching the gear motor assembly. Remove the gear motor assembly with the gear motor stopper.
  • Remove the belt from the gear motor assembly.
  • Remove the two screws O from the gear motor assembly.
REMOVING THE FAN MOTOR ASSEMBLY
  • Disconnect the harnesses from connector CN102, CN106, CN191, CN192, CN193 and CN181 on the main board.
  • Remove the five screws R attaching the main board with the cord clamp.
REMOVING THE MAIN BOARD & FRONT PANEL BOARD
  • Disconnect the harnesses from connector CN102, CN106, CN191, CN192, CN193 and CN181 on the main board.
  • Remove the five screws R attaching the main board with the cord clamp.
  • Remove the seven screws S attaching the front panel board inside the front panel assembly.
CD MECHANISM ASSEMBLY - SPEAKER TERMINAL BOARD
  • Remove the two screws T attaching the speaker terminal board on the underside of the CD mechanism base assembly.
  • Turn over the CD mechanism base assembly and disconnect the harness from connector CN703 and CN706 on the CD mechanism board.
  • Turn back the CD mechanism assembly and detach the CD mechanism cover while pulling the CD mechanism assembly outward to release the two joint tabs marked c.
  • Disconnect the card wire from the connector of the CD mechanism assembly inside the CD mechanism cover. Disconnect the harness from CN605 on the
  • CD mechanism board. Pull the CD mechanism assembly out of the three shaft of the CD mechanism cover. { When reassembling, confirm that the cushion of the CD mechanism assembly is reattached to the three shafts.}
  • Remove the CD mechanism board from the CD mechanism cover.
REMOVING THE JACK BOARD, SWITCH BOARD & LED BOARD
  • Disconnect the harness from connector CN502 on the jack board.
  • Remove the four screws V attaching the jack board.
  • Disconnect the harness from connector CN502 on the jack board.
  • Remove the six screws W attaching the switch board.
  • Disconnect the harness from connector CN706 on the CD mechanism board on the underside of the CD mechanism base assembly.
  • Push inward the two tabs d attaching the LED board case and release them.
  • Pull out the LED board from the LED board case.
Laser pickup replacement procedure is given by next post here.

↧
Search

JVC FS-SD5 - FS-SD7 - FS-SD9 - REPLACEMENT OF LASER PICKUP

May 26, 2013, 10:50 pm
$
0
0


LASER PICKUP REPLACEMENT
Cleaning the pick up lens
Before you replace the pick up, please try to clean the lens with a alcohol soaked cotton swab.
Life of the laser diode
When the life of the laser diode has expired, the following symptoms will appear.

Semi-fixed resistor on the APC PC board The semi-fixed resistor on the APC printed circuit board which is attached to the pickup is used to adjust the laser power. Since this adjustment should be performed to match the characteristics of the whole optical block, do not touch the semi-fixed resistor.  If the laser power is lower than the specified value, the laser diode is almost worn out, and the laser pickup should be replaced.  If the semi-fixed resistor is adjusted while the pickup is functioning normally, the laser pickup may be damaged due to excessive current.
REPLACEMENT OF LASER PICKUP
FLOW OF FUNCTIONAL OPERATION UNTIL TOC READ [Click on chart to Enlarge]
CONNECTING METHOD
When the KSM-770ABA mechanism is used, the expansion cable is used as follows.
First short-circuit the pickup circuit before removing the pickup. Then carry out the replacement.
KSM-770ABA
Disassemble procedure is given by previous post here.

↧
↧

JVC FS-SD5 - FS-SD7 - FS-SD9 - MAIN BOARD AND POWER SUPPLY - SYSTEM CONTROL - SCHEMATIC DIAGRAM [Circuit Diagram] & PCBs

May 26, 2013, 11:25 pm
$
0
0

MAIN BOARD & POWER SUPPLY
Click on circuits to Magnify
SYSTEM CONTROL SECTION
TUNER SECTION
PCBs

↧

SHARP LC-22DV510 – LC-24DV510 - LCD TV - SERVICE MODE & ADJUSTMENTS

May 27, 2013, 3:33 am
$
0
0


SERVICE MENU SETTINGS
  • In order to enter service menu, First Press “MENU” Then press the remote control code two times, which is “4725”.
In first screen following items can be seen:
VIDEO SETTINGS
AUDIO SETTINGS
OPTIONS 
TUNING SETTINGS
SOURCE SETTINGS
DIAGNOSTIC

↧

SHARP LC-22DV510 – LC-24DV510 - SOFTWARE UPDATE - DVD OPTION - REMOTE CONTROL SOFTWARE - PARENTAL PASSWORD - MAIN POWER SUPPLY & LED CONVERTER SCHEMATIC DIAGRAMS

May 27, 2013, 3:56 am
$
0
0

SOFTWARE UPDATE
Analog -Digital SW update via USB
  • Copy the files to USB (root).
  • mb60_en.bin
  • mboot.bin
  • usb_auto_update.tx

  1. Turn power to OFF by mechanical switch(rocker switch) or removing AC plug. And plug the USB to TV
  2. Keep pressing OK key from remote controller and then turn the TV power to ON(by mechanical switch or by inserting the AC plug) and keep OK key pressed until the standby led blinks rapidly(rapid blinking is faster than normal blinking)
  3. When the led is started to blink rapidly, you can release the OK key. Wait approximately for 1-2 minutes.
  4. When the blinks of led is stopped, TV opens automatically with the new SW.         
  6. Introduction for DVD option (if DVD available)
  • DVD Module reads digital data stored on DVD and CD such as DVD-Video, DVD-R/RW , DVD+R/RW , CD-R/RW , CD-Audio and MP3 Audio, JPEG (Picture CD) and DivX.
  • DVD module can play discs of both NTSC and PAL formats but it provides only P AL video output to LCD-TV side
  • DVD Module Decode MPEG-1, MPEG-2, with or without DVD 1.0 compliant encryption, JPEG (Kodak Picture CD compliant) and MPEG - 4 (DivX Network)
  • DVD Module has S/PDIF (AC-3 encoded 5.1 channel digital audio), Dolby Surround (two channel surround compatible analog audio down mixed from digital AC -3),Stereo(Analog two channel stereo) and Decoded Dolby Digital.
  • Group1(Group F): English French German Dutch Spanish Italian Swedish Portuguese Danish Finnish Norwegian.
  • Group2(GroupG): English German Czech Polish Hungarian Slovene Romanian Croatian Slovak Turkish.
  • Factory preset of password is “0000”
  • Universal service password is “1369”
  • Initial parental setting should be “OFF"
Vestel Remote Control  Codes Should be supported.
Language Options
The following language groups (with the stated Code page options) should be implemented:
Parental Password
Remote Control Software
Remote controller codes will be in universal RC -5 standard and will be decoded with Temic TSOP 1836 (3.3V supply) preamplifier.
MAIN POWER SUPPLY SCHEMATIC DIAGRAM{Click on circuit to Magnify}
LED CONVERTER

↧
↧

SHARP LC-26AD5E152 - LC-26AD5E187 - SERVICE MODE - REPLACING MEMORY IC -

May 27, 2013, 4:44 am
$
0
0

SERVICE MODE
  • To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than the standard time in the appropriate condition.
ADJUSTMENTS AFTER REPLACING MEMORY IC
  • Initial total of MEMORY IC, MICON VERSION, Digital TV MICON Firmware and POWER ON TOTAL HOURS can be checked on the screen. Total hours are displayed in 16 system of notation.
  • Turn on the POWER, and set to the TV mode.
  • Set the VOLUME to minimum.
  • Press both VOL. DOWN button on the set and Channel button (2)on the remote control for more than 2 seconds.
  • After the confirmation of MICON VERSION and Digital TV MICON Firmware, turn off the power.
          ADDRESS and DATA should appear as:
          CONFIRMATION OF CHECK SUM, MICON VERSION AND DIGITAL TV MICON FIRMWARE AND POWER ON TOTAL HOURS
          NOTE: If you set a factory initialization, the total hours is reset to "0"
          CONFIRMATION OF INITIAL DATA
          • If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to INITIAL SETTING TABLE.
          • Turn on the POWER, and set to the TV mode.
          • Set the VOLUME to minimum.
          • Press both VOL. DOWN button on the set and Channel button (6) n the remote control for more than 2 seconds.

          ADDRESS and DATA should appear as:
          • ADDRESS is now selected and should "blink". Using the UP/DOWN button on the remote, step through the ADDRESS until required ADDRESS to be changed is reached.
          • Press RIGHT/LEFT button to select DATA. When DATA is selected, it will "blink".
          • Again, step through the DATA using UP/DOWN button until required DATA value has been selected.
          • Pressing RIGHT/LEFT button will take you back to ADDRESS for further selection if necessary.
          • Repeat steps 4 to 6 until all data has been checked.
          • When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.

          After the data input, set to the initializing of shipping.
          • Turn POWER on.
          • Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 2 seconds.
          • After finishing the initialization of shipping, the unit will turn ON automatically.  The unit will now have the correct DATA for the new MEMORY IC.

          ↧

          SHARP LC-26AD5E152 - LC-26AD5E187 - SOFTWARE RE-WRITE FOR DIGITAL SOFTWARE

          May 27, 2013, 7:21 am
          $
          0
          0

          SOFTWARE UPDATE TOOLS
          JG201 Serial Communication Change JIG
          JG203 MICON PROGRAM JIG KIT 25-4.
          JG176 EU LCD MICON VER UP ROM DISC DTV ROM DISC
          JG212 EEPROM DISC
          JG204 MICON UPDATE TOOL DISC
          Ref. No.
          Part No.
          Parts Name
          Remarks

          JG176
          APJG176133
          EU LCD MICON VER UP ROM DISC

          Up-Date of the VCTP DATA
          JG176
          APJG176130
          DTV ROM DISC
          Up-Date of the Digital Soft Firmware

          JG212
          APJG212001
          EEP ROM DISC
          Up-Date of the EEPROM DATA

          JG201
          APJG201000
          Serial Communication
          Change JIG
          Connect the set to personal computer.

          JG203
          APJG203000
          MICON PROGRAM
          JIG KIT 25-4

          Connect the set to personal computer.
          JG204
          APJG204000
          MICON UPDATE TOOL DISC
          There is WRITING TOOLS in Disc.
          INSTALL FOR WRITING TOOLS
          • Set the MICON UPDATE TOOL DISC (JG204) to PC.
          • Install the LPT driver.
          It is necessary to install according to the PC.
          Windows 95/98 : Setup_LptDrv_v0104_9x.exe
          Windows 2000/XP : Setup_LptDrvDev_v020201_XP_2000.exe
          Windows NT : Setup_LptDrv_v0104_NT.exe
          • Re-boot the PC.
          • Install the “Setup_Visual_I2C_v3-2-3b8h.exe”, “Setup_VI2C_for_VCT_Pro_v0101.exe” and “Winupload 4.4.3.exe”.
          RE-WRITE FOR DIGITAL SOFTWARE
          • Unplug the AC cord, and remove the back cabinet.
          • Using the Serial Communication Change JIG (JG198) and RS232 Cable, connect the PC terminal and UART Connector(CP2402) on the DIGITAL PCB Ass'y.

          • Connect it in order of Digital Pcb => Serial Communication Change JIG(JG198) => RS232 Cable => PC
          • Insert the AC cord, turn on the power.
          • Press both VOLUME DOWN button on the set and Channel button (2) on the remote control for 2 seconds.
          • Confirm that displayed software version.
          • Set the Standby mode.
          • Set the DTV ROM DISC(JG176) to PC
          • Start the "Winupload"(Writing tool).
          • Select the "Port Setting" from Process menu, then please set it as follows.  NOTE: This step is not necessary from next time.
          • Select the "Connect" from File menu.
          • Select the "Upload" from Process menu, and select the Software(CB00C75091.urt) in DTV ROM DISC(JG176).
          • Unplug the AC cord on the set, then plug it in again.
          • Turn on the power.  The following window will appear, Up-date for Software will start.  "Uploading in progress" bar will begin to move.
          • When the "Uploading inprogress" bar reaches a right edge, the Writing for Digital Soft Firmware will start.  During the writing for Digital Soft Firmware, writing message will appear on the screen.  Finish the writing for Digital Soft Firmware, writing message will disappear.
          • Unplug the AC cord, and remove the Serial Communication Change JIG(JG198).
          • Insert the AC cord again.
          After the write, set to the initializing of shipping.
          • Turn on the power.
          • Press both VOLUME DOWN button on the set and Channel button (1) on the remote control for 2 seconds.  The set will turn into the standby mode.
          Check for the Firmware Version
          • Turn on the power.
          • Press both VOLUME DOWN button on the set and Channel button (2) on the remote control for 2 seconds.  When the changed version displays, the Re-write will be completed.
          • Select the "Disconnect" from File menu.

          ↧

          SHARP LC-26AD5E152 – LC-26AD5E187 – UPDATE FOR VCTP SOFTWARE AND EEPROM DATA

          May 27, 2013, 8:51 am
          $
          0
          0

          VCTP SOFTWARE UPDATE
          • Before Update the VCTP Software, it is necessary to install the WRITING TOOLS into the PC.  For the installation of WRITING TOOLS, refer to the "INSTALL FOR WRITING TOOLS".
          • Unplug the AC cord, and remove the back cabinet.
          • Short circuit the 1 pin and 2 pin of CP802 on the Main PCB.
          • Insert the AC cord.
          • Remove the short circuit 1 pin and 2 pin of CP802 on the Main PCB.
          • Set the EU LCD MICON VER UP ROM DISC (JG176) to PC.
          • Start the "VCTP" (Writing Tools).
          • Select the "LPT Preferences" from File/Preferences menu, then input "5" to the value of "Delay", and press "OK".  NOTE: This step is not necessary from next time.
          • Using the MICON PROGRAM JIG KIT 25-4 (JG203), connect the PC Terminal and 1~4 pin of CP802 on the Main PCB (JG203(Red line) =1 pin of CP802).
          • Press the “TVT”.

          • Remove the check of “Bootloader Version”, and check it again.
          • When the number of the side of the check box becomes 40, you can proceed to next step.  If the number doesn’t become 40, check the connection and try again from step 1.
          • Press the “Erase Flash”.
          • Then, press the “Load Bin =>  Flash” twice.
          • Press the [….] and select the writing Firmware.

          • Select the “Address", then input the ”0x7ffff", and press the “OK”
          • Press the “Load Bin => Flash”.
          • The following window will appear, then writing will start. After the finishing of the writing, window will close.
          • Finish the writing, unplug the AC cord, and remove the MICON PROGRAM JIG KIT 25-4 (JG203)
          • Insert the AC cord again, turn on the power.
          • Press both VOL. DOWN button on the set and Channel button (2) on the remote control for 2 seconds.
          • Confirm that displayed version agreement with writing.
          UPDATE FOR EEPROM DATA
          • Set to the standby mode, and remove the back cabinet.
          • Using the MICON PROGRAM JIG KIT 25-4 (JG203), connect the PC Terminal and Pin 1-4 of CP802 on the Main PCB (JG203(Red line) =1 pin of CP802).
          • Set the EU LCD MICON VER UP ROM DISC (JG176) to PC.
          • Start the "VCTP" (Writing Tools).
          • Press the "NVM".
          • Press the "Change", and select the writing EEPROM data file (TEXT file).
          • Press the "Update NVM from File".
          • The following window will appear, writing will start. After the finishing of the writing, the window will close.
          • Finish the writing, unplug the AC cord, and remove the MICON PROGRAM JIG KIT 25-4 (JG203).
          • Insert the AC cord again, turn on the power.
          • Press both VOL. DOWN button on the set and Channel button (2) on the remote control for 2 seconds.
          • Confirm that displayed version agreement with writing.

          ↧
          Search

          SHARP LC-20AD5E - LC-26AD5E - LC-32AD5E - LOSS OF DTV CHANNLES - ON-SCREEN MESSAGE "DATABASE EMPTY"

          May 27, 2013, 9:08 am
          $
          0
          0


          FAULT SYMPTOM: Loss of DTV channels, and the message "Database Empty" as on-screen display.

          POSSIBLE CAUSE:  DTV data corruption.

          STEPS: Update the Main, NVM and DTV firmware to latest versions.  Failure to update all firmware together may result in no DTV access.  To get more details about software update procedure, refer the previous 2 posts here.

          ↧
          ↧

          CCE HPS-2185FSE - CRT TELEVISION - SCHEMATIC DIAGRAM [Circuit Diagram] {Click on circuit to Magnify}

          May 27, 2013, 8:31 pm
          ↧

          DAEWOO MATIZ - CAR - 9B-4 - HEADLAMPS - PARKING LAMPS - STOP LAMPS - FOG LAMPS - FAULTS - REPAIR

          May 27, 2013, 10:07 pm
          $
          0
          0


          HEAD LAMPS & PARKING LAMPS
          • The headlamps are controlled by the multi-function lever located on the left side of the steering column. They will come on with the ignition switch in any position. Turning the headlamp switch to the first position turns on the parking lamps, the license plate lamps and the instrument panel illumination. Turning the switch to the second position turns on all of the previous lamps and the headlamps. Turning the switch to the off position turns off all the lamps.
          • Turning the lighting switch to the first position can turn on the parking lamps. Turning the switch to the OFF position can turn off the parking lamps.  This lever also controls headlamp high beam and low beam. When the headlamps are on, pushing the lever away from the driver until the switch clicks changes the lamp from low beam to high beam. An indicator lamp on the instrument cluster assembly will come on when the high beam headlamps are on. To return the headlamps to low beam, pull the lever toward the driver.
          • The headlamps must be aimed for proper illumination of the road. Headlamp aim should be checked whenever a new headlamp assembly is installed or service repairs to the front-end area may have disturbed the headlamp assembly or its mountings.
          DIAGNOSTIC INFORMATION  AND PROCEDURES [HEAD LAMPS]{Click on table to Magnify}
          REPAIR INSTRUCTION ON-VEHICLE SERVICE [HEAD LAMPS]
          Removal Procedure
          • Support the hood suitably.
          • Disconnect the negative battery cable.
          • Remove the front bumper spacer.
          • Remove the bolts (1).
          • Remove the front bumper spacer from the bumper fasia (2).
          Remove the headlamp.
          • Remove the bolts and washer (1).
          • Disconnect the electrical connectors.
          • Remove the headlamp (2) .
          INSTALLATION
          • Install the headlamp with the bolts.
          • Connect the headlamp connector and parking lamp connector.
          • Install the front bumper spacer with the bolts.
          • Connect the negative battery cable.
          SIGNAL LAMPS & HAZARD LAMPS

          Removal Procedure
          • Disconnect the negative battery cable.
          • Remove the front bumper spacer. Refer to Section 9M, Exterior Trim.
          • Remove the turn signal lamps from the front bumper spacer.
          • Disconnect the electrical connector (1).
          • Remove the screw (2).
          • Remove the turn signal lamp assembly (3).
          Installation Procedure
          • Connect the electrical connector.
          • Install the turn signal lamp assembly with the screw.
          • Install the front bumper spacer. Refer to Section 9M, Exterior Trim.
          • Connect the negative battery cable.
          SIDE TURN SIGNAL LAMPS

          Removal Procedure
          • Disconnect the negative battery cable.
          • Slide the side turn signal lamp rearward.
          • Remove the lamp.
          • Disconnect the electrical connector.
          Installation Procedure
          • Connect the electrical connector.
          • Install the side turn signal lamp.
          • Connect the negative battery cable.
          STOP LAMPS & INTERIOR COURTESY LAMPS
          TAIL LAMPS ASS'Y

          • Removal Procedure
          1. Disconnect the negative battery cable.
          2. Open the tailgate.
          3. Remove the luggage compartment wheelhouse trim.
          4. Disconnect the electrical connector.

          Remove the tail lamp assembly.
          • Remove the screws (1).
          • Remove the tail lamp (2).
          Installation Procedure
          • Install the tail lamp assembly with the screws.
          • Connect the electrical connector.
          • Install the luggage compartment wheelhouse trim.
          • Connect the negative battery cable.
          REAR FOG LAMP
          The rear fog lamp will not operate unless the headlamps are ON. If the headlamps are not operating, repair that problem before attempting to diagnose the rear fog lamp.
          FRONT FOG LAMP
          Removal Procedure
          • Disconnect the negative battery cable.
          • Raise and suitably support the vehicle.
          • Remove the front wheels.
          • Remove the front wheel house splash shield.
          Remove the clip and bolts.
          a. Bolt and clips.
          Remove the wheelhouse splash shield.
          b. Splash shield.
          Remove the front fog lamp.
          • Remove the screws (1).
          • Disconnect the electrical connector (2).
          • Remove the front fog lamp (3).
          Installation Procedure
          • Install the front fog lamp with the screws.
          • Connect the front fog lamp connector.
          • Install the front wheelhouse splash shields with the clips and the bolts.
          • Install the front wheels.
          • Lower the vehicle.
          • Connect the negative battery cable.
          REAR FOG/BACKUP LAMPS
          Removal Procedure
          • Disconnect the negative battery cable.
          • Remove the tail lamp assembly. Refer to “Tail lamps Assembly “in this section.
          • Remove the bulb(s).

          Installation Procedure
          • Install the bulb(s).
          • Install the tail lamp assembly. Refer to “Tail lamps Assembly “in this section.
          • Connect the negative battery cable.

          ↧

          DAEWOO MATIZ CAR - LIGHTING SYSTEMS - HIGH MOUNTED STOP LAMP - Bulb usage chart

          May 27, 2013, 10:53 pm
          $
          0
          0


          CENTRAL HIGH MOUNTED STOP LAMP [CHMSL]
          • Disconnect the negative battery cable.
          • Open the tailgate.
          • Pry off the tailgate trim panel. Refer to Section 9G Interior Trim.
          • Remove the CHMSL cover.
          • Remove the screws (1).
          • Remove the CHMSL cover (2).
          • Remove the CHMSL and bulb.
          • Remove the screws (1).
          CHMSL MOUNTING BRACKET
          Removal Procedure
          • Disconnect the negative battery cable.
          • Remove the center high–mounted stop lamp (CHMSL).
          • Remove the rear window wiper motor assembly. Re-fer to Section 9D, Wipers/Washer Systems.
          • Remove the CHMSL mounting bracket.
          • Remove the bolts (1).
          • Remove the CHMSL mounting bracket (2).
          LICENSE PLATE LAMPS
          Removal Procedure
          • Disconnect the negative battery cable.
          • Remove the license plate lamp from the tailgate handle.
          • Remove the screws (1).
          • Draw out the license plate lamp (2).
          • Remove the license plate lamp bulb (3).
          • Remove the rear window wiper motor assembly
          • Disconnect the electrical connector in the tailgate.
          • Remove the tailgate handle.
          • Remove the license plate lamp socket.
          • Remove the socket (1).
          DOOR JUMP SWITCH
          Removal Procedure
          • Disconnect the negative battery cable.
          • Remove the door jamb switch.
          • Remove the screw (1).
          • Disconnect the electrical connector (2).
          • Remove the door jamb switch (3).
          INTERIOR COURTESY LAMP
          Removal Procedure
          • Disconnect the negative battery cable.
          • Remove the interior courtesy lamp.
          • Pry off the interior courtesy lamp lens (1).
          • Remove the screws (2).
          • Disconnect the electrical connector (3).
          • Remove the interior courtesy lamp (4).
          DAYTIME RUNNING LAMP MODULE
          (W/Europe Only)
          Removal Procedure
          • Disconnect the negative battery cable.
          • Disconnect the electrical connector (1).
          • Remove the screws (2) and the daytime running lamp module.
          LUGGAGE ROOM LAMP
          Removal Procedure
          • Disconnect the negative battery cable.
          • Open the tailgate.
          • Remove the luggage room lamp.
          • Remove the luggage room lamp (1).
          • Disconnect the electrical connector (2).
          BULB USAGE CHART
          Click on pictures to Magnify

          ↧

          DAEWOO MATIZ CAR - LIGHTING SYSTEMS - SCHEMATIC AND ROUTING DIAGRAMS

          May 27, 2013, 11:27 pm
          $
          0
          0


          BACKUP LAMP/S CIRCUIT
          HEAD LAMP CIRCUIT
          HEAD LAMP LEVELING CIRCUIT
          TAIL & LICENCE PLATE LAMP CIRCUIT
          STOP LAMP CIRCUIT
          TURN & HAZARD LAMP CIRCUIT
          INTERIOR COURTESY LAMP CIRCUIT
          FRONT FOG LAMP CIRCUIT
          REAR FOG LAMP CIRCUIT
          DIMMER CONTROL CIRCUIT [EXCEPT W/EUROPE]
          DAYTIME RUNNING LAMPS CIRCUIT [W/EUROPE ONLY]
          Click on circuits to Enlarge

          ↧
          ↧

          KONKA KL26AS21Q - KL27BS23Q - KL32AS21Q - KL37BS21Q - KL40BS21Q - KL42AS23Q - REPAIR HELP

          May 28, 2013, 5:13 am
          $
          0
          0

          APPLICABLE TO - KL26AS21Q - KL26AS23Q - KL26AS25Q - KL27BS23Q - KL32AS21Q - KL32AS22Q - KL32BS23Q- KL32AS25Q - KL32BS28Q - KL37BS21Q - KL37AS22Q - KL37AS23Q -  KL40BS21Q - KL42AS23Q
          • Power Supply Board/ M/B Voltage confirmation
          • The input and output characteristic test of power
          • Intention of test: Check input and output to find if short circuit.
          Checking Method:
          Use Multimeter (VICTOR VC9801) of resistor to check No/Yes short circuit.
          Number
          Item
          Test Point
          Standard

          Power Supply



          1
          The resistor of AC input
          AC Input Connector CON1

          No short circuit
          2
          The resistor of 24Voutput
          24Voutput of connector CON3

          No short circuit
          3
          The resistor of 12Voutput
          24Voutput of connector CON3
          No short circuit
          M/B



          1
          The resistor of 24Voutput
          24Voutputof connector XS801

          No short circuit
          2
          The resistor of 12Voutput
          12Voutputof connector F800

          No short circuit
          3
          The resistor of 5Voutput
          5Voutput of connector L804

          No short circuit
          4
          The resistor of 3.3Voutput
          3.3Voutput of connector N803

          No short circuit
          5
          The resistor of 2.5Voutput
          2.5Voutput of connector N808

          No short circuit
          6
          The resistor of 1.8Voutput
          1.8Voutput of connector N804

          No short circuit
          7
          A: The resistor of PANEL5V output
          B: The resistor of PANEL12Voutput
          A: PANEL5Voutput of connector L814
          B: PANEL12Voutput of connector L813
          No short circuit
          Verify the state of TV set:  switch the TV ON by “Power on/off” switch, Then verify the LED color of touch button. Red is standby state and blue is working state.
          Checking Supply Power:  If the color of LED is green, the power supply for signal board. F801 supply 5V, N804, N803 supply 3.3V power(Test the PIN 2). N808 supply 2.5V(Test the PIN 2), D806 supply 8V, N804 supply 1.8V. All these are for main IC N001, N401, N504.

          Digital signal part: Turn on the power => N001 RESET and IO port initialize => N504 electrify, reset, initialize => Turn on back light lamp => Successful start And LOGO display.
          • After turning on the power, if blank screen appears (no back light lamp), just press POWER button one times, if blank screen still there.
          • Check if the voltage of every power supply is normal.
          • Check if the crystal oscillator Z001(22.1184MHz) Z501(14.318MHz) Z400(24.576MHZ) oscillate or not, and oscillate frequency is right or not.
          • Back light control signal (BKLON) of XS806 has high level (above 3V) or not, if not, check whether fault soldered or short circuit happened.
          • If back light lamp is on while there is no display, check N001 and N504’s reset circuit and the output of the oscillator to confirm the CPU and SCALER are working or not. If RGB is abnormal, check N504;If RGB is working correctly and the other channel is abnormal check N504.
          White calibration adjustment.
          • Receive black or white signal under AV or PC mode, adjusting brightness and contrast to set the brightness to 5 Nit in dark area and 90 Nit in bright area.
          • Adjust white balance. 
          • Enter factory menu, select User RGB Menu

          Adjust
          B-R
          0-63
          default
          32

          B-G
          0-63
          default
          32

          B-B
          0-63
          default
          32

          C-R
          0-205
          default
          128

          C-G
          0-205
          default
          128

          C-B
          0-205
          default
          128
          Adjusting chromaticity coordinates of black and white to fit the requirement (X=0.285, Y=0.293), or plug automatic calibration system to adjust white calibration automatically.

          ↧

          KONKA KLC-2718UG - KLC-3216UG - KLC-3211UG - KLC-3711UG - MAIN POWER SUPPLY [SMPS] - SCHEMATIC DIAGRAM [Circuit Diagram]

          May 28, 2013, 5:33 am
          $
          0
          0

          MAIN POWER INVERTER [SMPS] SCHEMATIC DIAGRAM

          Click on circuit to Enlarge

          ↧
          Search

          URC 8040 - UNIVERSAL REMOTE CONTROL - SETUP CODE LIST FOR TVs

          May 28, 2013, 9:35 pm
          $
          0
          0


          SETUP CODE LIST FOR TELEVISIONS
          A.R. Systems 0037 0556
          Accent 0037 0556
          Accuphase 0556 1909
          Acec 0012
          Adcom 0625
          Admiral 0093 0418 0087 0163 0264
          Adyson 0217 0216
          AEA 0037 0556
          Agashi 0216 0264 0217
          AGB 0516
          Agef 0087
          Aiko 0009 0037 0556 0216 0371 0035 0433 0072 0361 0191 0264 0217
          Aim 0037 0072 0412 0556
          Aiwa 0701
          Akai 0361 0208 0371 0037 0433 0191 0035
          0009 0072 0218 0714 0163 0516 0715
          0602 0556 0548 0581 0480 0217 0631
          0216 0264 0178 0377 0606 1037
          Akiba 0218 0282 0455 0037 0556
          Akito 0037 0556
          Akura 0037 0556 0668 0412 0009 0218 0282 0264
          Alaron 0216
          Alba 0009 0418 0370 0235 0371 0668 0037
          0556 1037 0355 0218 0216 0163 0487
          0581 0036 0579
          Alkos 0035
          Allorgan 0206 0217
          Allstar 0037 0556
          Ambassador 0177
          Amplivision 0217 0370 0320
          Amstrad 0177 0009 0516 0264 0371 0218 0037 0556 0433 0412 1037 0648 0581
          Anam 0037 0556 0009
          Anam National 0037 0556 0650
          Anex 0421
          Anglo 0009 0264
          Anitech 0009 0264 0037 0556 0282 0102
          Ansonic 0370 0037 0556 0009 0668 0374 0163 0292 0102 0411 0259 0012 0104
          Apollo 0473
          Arc en Ciel 0109
          Arcam 0216 0217
          Ardem 0486 0714 0037 0556
          Aristona 0556 0037 0012
          Arthur Martin 0163
          ASA 0105 0346 0070 0104 0087
          Asberg 0037 0556 0102
          Asora 0009
          Astra 0037 0556
          Asuka 0218 0217 0216 0264 0282
          Atlantic 0037 0556 0216 0206 0320 0259
          Atori 0009
          Auchan 0163
          Audiosonic 0009 0037 0374 0556 0109 0714 0715 0217 0370 0337 0264 0218 0486
          Audioton 0217 0486 0370 0264
          Autovox 0087 0206 0349 0217
          AWA 0011 0036 0009 0157 0374 0412 0037 0556 0216 0606 0217 0108 0264
          Axxent 0009
          Axxon 0714
          Baird 0109 0193 0343 0190 0072 0073 0217 0208
          Bang & Olufsen 0565 0087 0275
          Barco 0380 0163
          Basic Line 0374 0037 0163 0668 0556 0009 0218 0282 0217 0455
          Bastide 0217
          Baur 0195 0512 0037 0556 0191 0361 0349
          1505 1010
          Bazin 0217
          Beaumark 0178
          Beko 0486 0035 0714 0370 0037 0556 0606 0715
          Beon 0037 0556 0418
          Berthen 0668
          Best 0337 0370 0421
          Bestar 0037 0556 0370 0374
          Bestar-Daewoo 0374
          Binatone 0217
          Black Diamond 1037 0556
          Black Panther 0102
          Blacktron 0282
          Blackway 0282 0218
          Blaupunkt 0191 0195 0455 0170
          Blue Sky 0037 0714 1037 0487 0668 0715 1909 0556 0218 0282 0455
          Blue Star 0282
          Boots 0217 0009
          Bosch 0320
          BPL 0037 0556 0282
          Brandt 0625 0109 0335 0343
          Brandt Electronique 0335
          Brinkmann 0037 0556 0668 0519 0418 0486
          Brionvega 0037 0556 0087
          Britannia 0216 0217
          Brother 0264
          Bruns 0087
          BSR 0163 0361
          BTC 0218
          Bush 0668 0218 0163 0349 0009 0036 0037 0371 0235 0282 0355 0374 0519 0264 0361 1037 0487 0208 0217 0698 0581 0556 0714
          Canton 0218
          Capsonic 0264
          Carad 0610 0037 0556 0668
          Carena 0455 0037 0556
          Carrefour 0036 0070 0037 0556
          Carver 0170
          Cascade 0009 0037 0556
          Casio 0037 0556 0163 0349
          Cathay 0037 0556
          CCE 0037 0556 0217
          Centrum 1037
          Centurion 0037 0556
          Century 0087 0238
          CGE 0418 0370 0163
          Cimline 0009 0235 0218
          Citizen 0060
          City 0009
          Clarivox 0418 0037 0556 0070 0102
          Clatronic 0037 0370 0371 0714 0218 0264 0556 0217 0009 0102 0320 0579 0648
          Clayton 1037
          CMS 0216
          CMS hightec 0217
          Concorde 0009
          Condor 0320 0037 0556 0370 0216 0009 0282 0102 0418 0411 0163 0264
          Conrad 0037 0556
          Contec 0216 0009 0157 0011 0036 0264 0037 0556
          Continental Edison 0109 0487
          Cosmel 0009 0337 0037 0556
          Crosley 0087 0163
          Crown 0009 0370 0486 0037 0556 0487 0714 0606 0715 0421 0418 0579 0208 0339
          CS Electronics 0216 0218
          Curtis Mathes 0060 0093 0166
          Cybertron 0218
          D-Vision 0037 0556
          Daewoo 0634 0374 1909 0499 0037 0556 0009 0216 0218 0217 1137
          Dainichi 0218 0216
          Dansai 0037 0556 0264 0035 0216 0009 0036 0217
          Dansette 0412
          Dantax 0370 0486 0714 0606 0715
          Datsura 0208
          Dawa 0037 0556
          Daytron 0009 0374 0037 0556
          de Graaf 0208 0044 0163 0548
          Decca 0072 0516 0037 0556 0217 1137 0621
          Deitron 0037 0556 0374 0218
          Denko 0264
          Denver 0037 0556 0606
          DER 0193 0190
          Desmet 0320 0037 0556 0009 0087
          Diamant 0037 0556
          Diamond 0264 0698 0696
          Digatron 0037 0556
          Digiline 0037 0556
          Digitor 0037 0556
          Digivision 0361
          DiK 0037 0556
          Dixi 0009 0037 0556 0217 0087
          Domeos 0668
          Doric 0349
          DTS 0009
          Dual 0349 0217 0343 0519 0037 0556 0259
          0163
          Dumont 0087 0104 0102 0217 0070 0072
          Dunai 0163
          Dux 0037 0556 0012
          Dynatron 0037 0556 0012
          E-Elite 0218
          Edison-Minerva 0487
          Elbe 0435 0238 0259 0292 0370 0163 0037
          0556 0218 0191 0411 0610 0217 0516
          0361
          Elbe-Sharp 0516
          Elcit 0087 0516 0102 0163
          Elekta 0009 0037 0556 0264 0282
          ELG 0037 0556
          Elin 0216 0037 0556 0105 0104 0548 0361
          0349 0163 0009
          Elite 0218 0037 0556 0320
          Elman 0102
          Elta 0009 0264 0216
          Emerson 0177 0178 0087 0037 0556 0371 0070 0282 0320 0361 1909 0486 0370 0163
          Emperor 0282
          Enzer 0696
          Erres 0037 0556 0012
          ESC 0037 0556 0217
          Estèle 0163
          Etron 0037 0556 0009 0163
          Eurofeel 0264 0217
          Euroman 0216 0264 0037 0556 0217 0421 0370
          Europa 0037 0556
          Europhon 0037 0516 0102 0163 0217 0556 0216
          Excel 0037 0556
          Expert 0206 0259 0163
          Exquisit 0037 0556
          Fagor 0037 0556
          Family Life 0037 0556
          Fenner 0374 0009
          Ferguson 0073 0625 0190 0335 0238 0193 0109 0560 0037 0556 0035 0343 0104 0108 0361
          Fidelity 0163 0512 0037 0556 0371 0412 0193 0216 0264
          Filsai 0217
          Finlandia 0208 0346 0548 0361 0163 0072 0343 0045
          Finlux 0105 0104 0037 0556 0714 0346 0217 0072 0163 0516 0715 0070 0087 0102 0411 0631 0492 0480 0473 0418 0606
          Firstline 0037 0556 0374 0668 0714 0163 0009 0216 1909 0102 0217 0411 0349 0238 0072 0235 0208 0361
          Fisher 0104 0217 0036 0208 0370 0045 0087 0157 0361 0163 0349 0072
          Flint 0037 0556 0610 0072 0218 0455 0264
          FNR 0102
          Forgestone 0193
          Formenti 0163 0037 0556 0486 0216 0087 0320
          Formenti-Phoenix 0216 0320
          Fortress 0093 0087
          Fraba 0037 0556 0370
          Friac 0009 0037 0556 0102 0421 0370 0499 0655
          Frontech 0264 0349 0217 0009 0163
          Fujitsu 0206 0072 0102 0217 0163 0009 0683 0037 0556 0361 0259
          Fujitsu General 0009 0217 0206 0163
          Funai 0668 0264 0412
          Future 0037 0556
          Galaxi 0102 0037 0556 0361 0163
          Galaxis 0370 0418 0037 0102 0556
          Galeria 0009
          GBC 0163 0009 0374 0218
          GE 0343 0178 0282 0560 0109 0335
          Geant Casino 0163
          GEC 0163 0361 0349 0037 0516 0556 0072 0217
          Geloso 0009 0163 0374
          General 0109
          General
          Electric 0343
          General
          Technic 0009
          Genesis 0009
          Genexxa 0218 0037 0556 0412 0163 0009
          Giant 0217
          Goldfunk 0668
          Goldhand 0216
          Goldline 0337
          GoldStar 0037 0009 0370 0377 0217 0178 0216 0556 0163 0361 0109 0606 0044
          Gooding 0487
          Goodmans 0634 0374 0037 0499 0556 1037 0668 1909 0036 0264 0072 0516 0009 0487 0371 0343 0235 0035 0480 0560 0217 0335 0218
          Gorenje 0370 0421
          GPM 0218
          Gradiente 0170 0037 0556
          Graetz 0361 0371 0163 0037 0339 0556
          Gran Prix 0648
          Granada 0037 0556 0226 0356 0012 0045 0072 0108 0208 0217 0036 0339 0516 0473 0335 0560 0163 0225 0343 0548
          Grandin 0037 0556 0009 0163 0610 0714 0715 0668 0374 0320 0282 0218 0455 0579
          Gronic 0102 0217 0163
          Grundig 0195 0191 0487 0070 0037 0556 0587 0009 0036 0443 0370
          Haier 0698 0264
          Halifax 0264 0216 0217
          Hampton 0216 0217
          Hanimex 0218
          Hanseatic 0037 0556 0499 0519 0349 0163 0361 0292 0282 0320 0634 0370 0009 0217 0087 0377
          Hantarex 0009 0037 0556 0102 0516
          Hantor 0037 0556
          Harwood 0009 0412 0037 0556
          Hauppauge 0037 0556
          HCM 0009 0412 0037 0556 0217 0218 0418 0282 0264
          Hedzon 0556 0037
          Hema 0217 0009
          Hemmermann 0349
          Hifivox 0109
          Higashi 0216
          Highline 0264 0037 0556
          Hikona 0218
          Hinari 0208 0037 0556 0009 0218 0036 0163 0355 0443 0487 0235 0264
          Hisawa 0282 0218 0455 0610
          Hit 0087
          Hitachi 0225 1225 0349 0036 0356 0044 0108 0473 0163 0343 0578 0217 0194 0516 0072 0481 0499 0037 0556 0109 0548 0719 0634 0744 0178 1137 0105 0492 0361 0512 0480 1045
          Hitachi Fujian 0108 0225
          Hitsu 0009 0455 0218 0610
          HMV 0087
          Hornyphone 0037 0556 0012
          Hoshai 0218 0455
          Huanyu 0374 0216
          Hygashi 0217 0216
          Hyper 0009 0216 0217
          Hypersonic 0361
          Hypson 0037 0556 0714 0715 0264 0217 0282 0455 0238
          Hyundai 0037 0556
          Iberia 0037 0556
          ICE 0264 0037 0371 0009 0556 0218 0217
          0216
          Ices 0218 0216
          Icos 0012
          Ict 0037 1137 0556
          Imperial 0037 0163 0370 0556 0411 0361 0349 0418
          Indiana 0037 0556
          Ingelen 0487 0610 0714 0163 0361
          Ingersoll 0009
          Inno Hit 0009 0072 0037 0556 0218 0217 0516 0102 0282
          Innovation 0519 0037 0556
          Interactive 0037 0556 0012 0087 0512 0275 0163 0361 0370 0109
          Interbuy 0009 0037 0264 0512 0556
          Interfunk 0037 0556 0012 0087 0512 0275 0163 0361 0370 0109 0349
          Internal 0037 0556 0499 0374 1909
          International 0216
          Intervision 0282 0217 0455 0037 0371 0377 0519 0486 0370 0487 0218 0102 0163 0264 0009 0556
          Irradio 0009 0037 0556 0218 0371
          Isukai 0218 0037 0556 0282 0455
          ITC 0217 0320
          ITS 0037 0371 0218 0282 0264 0216 0009
          0556
          ITT 0163 0480 0349 0361 0473 0548 0193
          0346 0339 0208 0610
          ITT Nokia 0361 0548 0163 0473 0480 0349 0346
          0208 0339 0606 0610 0631
          ITV 0264 0037 0556 0374
          Jean 0036
          JEC 0035
          JMB 0037 0499 0634 0374 0556 0443
          Jocel 0712
          Jubilee 0556
          JVC 0653 0190 0036 0193 0371 0218 0606
          0418
          Kaisui 0218 0282 0037 0556 0216 0455 0217 0009
          Kamp 0216
          Kapsch 0163 0361 0206 0259 0104
          Karcher 0037 0556 0421 0370 0610 0163 0282 0102 0264
          Kathrein 0556 0037
          Kawa 0371
          Kawasho 0216
          KB Aristocrat 0163
          Kendo 0610 0037 0556 0163 0519 0512 0370 0377 0411 0102 0235
          Kennedy 0163 0206 0435
          Kenwood 0105
          Kingsley 0216
          Kiton 0556 0037
          Kneissel 0037 0370 0610 0411 0374 0499 0556 0435 0259 0292 0238
          Kolster 0037 0556 0102 0349
          Konka 0037 0556 0371 0714 0418 0218 0725 0726
          Kontakt 0487
          Korpel 0037 0556
          Korting 0087 0421 0370 0320
          Kosmos 0037 0556
          Kotron 0412 0264
          Koyoda 0009
          Kraking 0238
          Kriesler 0012
          KTV 0217
          Kuba 0349 0163
          Kuba
          Electronic 0349 0163
          Kyoshu 0412 0418 0264
          Kyoto 0163 0216 0217
          LaSAT 0486 0370
          Leader 0009
          Lecson 0037 0556
          Lemair 0411
          Lenco 0037 0009 0163 0374 0556 0104
          Lenoir 0009
          Levis Austria 0037 0556
          Leyco 0264 0072 0037 0556 0579
          LG 0037 0370 0009 0377 0217 0556 0714
          0216 0163 0178 0361 0606 0109
          Liesenk & Tter 0037 0556
          Liesenkotter 0037 0012 0556
          Lifetec 0037 0009 0519 0374 0668 0512 0655 1037 1137 0556 0218 0264
          Lloyd's 0009
          Loewe 0512 0037 0556 0655 0370 0633 0087 0292
          Logik 0011 0060 0698 0037 0193 0556 0371
          Logix 0668
          Luma 0037 0206 0163 0411 0556 0374 0009 0259
          Lumatron 0206 0037 0556 0163 0259 0361 0217 0264 0073
          Lux May 0037 0009 0556 0581
          Luxman 0579
          Luxor 0194 0480 0492 0349 0361 0208 0356 0548 0163 0346 0473 0217 0631
          LXI 0178
          Madison 0037 0556
          Magnadyne 0087 0516 0102 0163

          Magnafon 0516 0102 0216 0073
          Magnavox 0037 0556 0036
          Magnum 0648 0714 0037 0556 0715
          Mandor 0264
          Manesth 0037 0556 0235 0217 0264 0320 0035 0163
          Manhattan 0037 0556 0668 1037 0163
          Marantz 0037 0556 0412
          Marelli 0087
          Mark 0037 0556 0217 0216 0374 0009 0714 0715
          Masuda 0218 0371 0009 0264 0037 0217 0556
          Matsui 0037 0556 0487 0009 0235 0177 0011 0355 0072 0036 0217 0371 0433 0443 0579 0455 0163 0349 0516 0035 0208 0045 0195 0191 0335
          Matsushita 0650
          Matsuviama 0587
          Mediator 0037 0556 0012
          Medion 0037 0668 0519 0512 0556 1137 0698 0808
          Megas 0610
          Megatron 0178
          Melectronic 0346 0037 0512 0109 0343 0105 0104 0374 0009 0217 0480 0492 0216 0411 0349 0163 0556 0634 0361 0191 0195
          Memorex 0009 0178 0060
          Memphis 0337 0072 0009
          Mercury 0037 0009 0556
          Metz 0195 0447 0191 0367 0746 0037 0087 0556 0275 0587 0668 1037
          MGA 0178 0037 0556 0218 0104
          Micromaxx 0037 0556 0668 1037 0808
          Microstar 0808
          Minato 0037 0556
          Minerva 0487 0195 0070 0191 0516 0108
          Minoka 0412 0037 0556
          Mistral Electronics 0193
          Mitsubishi 0108 0093 0512 0037 0178 0087 0036 0193 0556 0208
          Mitsuri
          General 0163
          Mivar 0292 0370 0216 0609 0516 0217
          Monaco 0009
          Morgan's 0037 0556
          Motorola 0093
          MTC 0060 0370 0349 0512 0163 0216 0361
          Multi-broadcast 0193
          Multistandard 0102
          Multitec 0037 0556 0486 0668 1037
          Multitech 0349 0009 0486 0037 0370 0556 0217 0216 0102 0264
          Murphy 0104 0216 0072 0163
          Musikland 0037 0218 0556
          Myryad 0556 0037
          NAD 0166 0178 0361 0163
          Naiko 0037 0606 0556
          Nakimura 0374 0037 0556
          Naonis 0163
          NAT 0226
          National 0226
          NEC 0170 0036 0320 0455 0009 0374 0217 0037 0556 0011 0499
          Neckermann 0037 0191 0370 1505 1010 0556 0163 0418 0349 0087 0217 0411 0320 0512
          NEI 0037 0556 0337 0371 0163
          Netsat 0037 0556
          Network 0337
          Neufunk 0037 0009 0556 0610 0218 0282 0714
          New Tech 0037 0009 0556 0343 0217
          New World 0218
          Nicamagic 0216
          Nikkai 0072 0218 0037 0556 0217 0264 0035 0337 0216 0009 0036
          Nikko 0178
          Nobliko 0102 0070 0216
          Nogamatic 0109
          Nokia 0361 0163 0480 0349 0548 0492 0473 0339 0208 0374 0631 0606 0346 0320 0610 0109
          Nordic 0217
          Nordmende 0109 0714 0343 0560 0195 0037 0556 0335 0163
          Norfolk 0163
          Normerel 0037 0556
          Novak 0012
          Novatronic 0037 0105 0374 0556
          Nurnberg 0163 0361
          Oceanic 0163 0361 0208 0473 0548 0480
          Odeon 0264
          Okano 0370 0037 0556 0264 0072 0009
          Omega 0264
          Onwa 0371 0602 0218 0433 0581 0102
          Opera 0037 0556
          Optimus 0650 0166
          Optonica 0093
          Orbit 0037 0556
          Orion 0037 0355 0556 0655 0714 0235 0177 0320 0011 0009 0443 0102 0264 0412 0516
          Orline 0037 0218 0556
          Ormond 0668 1037 0037 0556
          Orsowe 0516
          Osaki 0072 0218 0217 0264 0037 0412 0374 0355 0556
          Osio 0037 0556
          Oso 0218
          Osume 0157 0072 0036 0218 0037 0556
          Otto Versand 1505 1010 0036 0093 0512 0037 0556 0195 0349 0191 0361 0235 0109 0226 0320 0217 0009 0282 0343 0516 0519
          Pacific 0037 0556 1137
          Pael 0216
          Palladium 0370 0037 0191 1505 1010 0418 0556 0349 0087 0163 0217 0411 0655 0519
          Palsonic 0264 0412 0037 0217 0377 0218 0698 0556
          Panama 0009 0217 0264 0216 0037 0556
          Panasonic 0650 1650 0226 0361 0367 0516 0037 0556 0163 0548
          Panavision 0037 0411 0556
          Pathe Cinema 0163 0238 0216 0320 0292 0349 0370
          Pathe
          Marconi 0109
          Pausa 0009
          Perdio 0072 0320 0163 0037 0216 0282 0556
          Perfekt 0037 0556
          Philco 0087 0418 0163 0370 0037 0556 0519
          Philex 0193 0163
          Philharmonic 0217
          Philips 0556 0037 0238 0012 0721 0191 0087 0193 0343 0374
          Phoenix 0037 0556 0370 0486 0163 0087 0072 0216 0320
          Phonola 0037 0556 0012 0087 0193 0216
          Pilot 0556 0037 0712
          Pioneer 0166 0037 0556 0370 0343 0361 0109 0163 0486 0512 0760
          Pionier 0370 0486
          Plantron 0037 0556 0264 0009
          Playsonic 0217 0714
          Policom 0102 0109 0206 0238 0275 0361 0163 0070 0087
          Polytron 0697
          Poppy 0009
          Portland 0374 1909
          Powerpoint 0487
          Prandoni-Prince 0516 0361
          Precision 0217
          Premier 0009
          Prima 0009 0264 0412
          Prinz 0072 0349 0361 0194
          Profex 0009 0163 0361
          Profi 0009
          Profitronic 0037 0556 0102
          Proline 0037 0556 0625 0634 0411 0012 0072
          Prosonic 0037 0556 0370 0374 0371 0668 0714 0216 0579
          Protech 0037 0556 0217 0009 0349 0102 0264 0418 0337 0668 0282 0163 0486
          Proton 0178
          Provision 0499 0037 0556 1037
          Pye 0037 0556 0012 0087 0374 0349 0412
          Pymi 0009
          Quadral 0218
          Quasar 0650 0009
          Quelle 0037 1505 1010 0011 0109 0512 0349 0191 0361 0036 0217 0070 0104 0105 0668 0556 0157 0195 0264 0346 0421 0009
          Questa 0036
          R-Line 0037 0556 0163
          Radialva 0109 0218 0163 0037 0556
          Radiola 0037 0556 0012 0217
          Radiomarelli 0087 0516 0037 0556
          RadioShack 0037 0556 0178
          Radiotone 0009 0037 0556 0370 0579 0418 0412 0648 0668 0264
          Rank 0070
          Rank Arena 0036 0157
          RBM 0070
          RCA 0625 0093 0560 0335 0343
          Realistic 0178
          Recor 0037 0556
          Rectiligne 0037 0556
          Rediffusion 0361 0548 0036 0346
          Redstar 0037 0556
          Reflex 0037 0556 1037 0668
          Reoc 0714 0634 1909
          Revox 0037 0556 0370
          Rex 0206 0411 0163 0259 0264
          RFT 0087 0292 0370 0072 0264 0037 0556
          Rhapsody 0216
          Ricoh 0037 0556
          Roadstar 0009 0418 0037 1037 0556 0218 0264 0282
          Robotron 0087
          Rodex 0037 0556
          Rowa 0264 0698 0217 0712
          Royal Lux 0421 0370 0412 0335
          Rukopir 0556 0037
          Saba 0625 0087 0163 0109 0516 0343 0361 0498 0335 0548 0560
          Saccs 0238
          Sagem 0610 0455 0282
          Saisho 0235 0516 0177 0009 0011 0217 0163 0264
          Saivod 0037 0556
          Sakaï 0163
          Salora 0194 0349 0163 0356 0361 0516 0548 0339 0208
          Salsa 0335
          Sambers 0516 0102
          Samsung 0618 0587 0037 0178 0556 0009 0217 0370 0264 0216 0644 0060 0072 0208 0519 0163
          Sandra 0216 0217
          Sanela 0238
          Sansui 0037 0556 0371 0655 0726 0725 0602 0421 0455
          Santon 0009
          Sanyo 0208 0157 0292 0036 0011 0370 0339 0072 0216 0217 0104 0045 0009 0163 0037 0108 0556 0486
          Save 0037 0556
          SBR 0037 0556 0012 0193
          Schaub
          Lorenz 0349 0548 0714 0606 0361 0486 0374
          Schneider 1137 0037 0556 0519 0012 0349 0259
          0343 0217 0371 0361 0218 0668 1037
          0163 0648 0714 1909
          Scotland 0163
          Scott 0178
          Sears 0178
          SEG 0037 0556 1037 1437 0668 0217 0487
          0009 0349 0163 0264 0634 0036 0102
          0216 0218 1909
          SEI 0087 0102 1505 1010 0163 0516 0349
          0206 0037 0556 0177
          Sei-Sinudyne 0102 0206 0516 1505 1010 0037 0556 0087
          Seleco 0206 0259 0163 0411 0371 0036 0264 0346
          Sencora 0009
          Sentra 0035 0218 0009 0349
          Serino 0610 0455 0216 0093
          Sharp 0093 1193 0157 0036 0653 0193 0516 0760
          Shintoshi 0037 0556
          Shivaki 0037 0556 0443 0374
          Siarem 0163 0087 0102 0516
          Siemens 0191 0195 0157 0037 0556 0361
          Siera 0037 0556 0012
          Siesta 0370
          Silva 0037 0556 0216 0361 0648
          Silver 0036 0037 0455 0361 0556 0715 0163
          Singer 0009 0087 0037 0556 0102 0435 0335 0163
          Sinudyne 0177 0087 0235 0102 0163 0361 0516 0349 1505 1010 0206 0037 0556
          Skantic 0356
          Sky 0037 0556
          Skymaster 0105
          Skysonic 0696
          SLX 0668
          Smaragd 0487
          Sogera 0320
          Solavox 0361 0072 0163 0548 0037 0556
          Sonawa 0218
          Soniko 0037 0556
          Sonitron 0208 0370 0339 0217
          Sonneclair 0037 0556
          Sonoko 0037 0556 0009 0264 0282 0217
          Sonolor 0208 0163 1505 1010 0548 0361 0282
          Sontec 0037 0556 0370 0009
          Sony 1505 1651 1010 0011 0036 0102 0037 0556
          Sound & Vision 0102 0218 0374 0037 0556
          Soundesign 0178
          Soundwave 0037 0556 0320 0418
          Spectra 0009
          Ssangyong 0009
          Staksonic 0009
          Standard 0037 0556 1037 0218 0009 0217 0320 0374
          Starlite 0009 0163 0037 0556 0264 0412
          Stenway 0282 0218
          Stern 0206 0259 0163 0264 0411 0435
          Strato 0037 0556 0264 0009
          Stylandia 0217
          Sunic Line 0037 0556
          Sunkai 0355 0455 0218 0235 0610 0037 0556 0487
          Sunstar 0371 0037 0556 0009 0579 0264
          Sunwood 0037 0556 0009
          Superla 0516 0216 0217
          SuperTech 0009 0037 0556 0216 0218
          Supra 0374 0009
          Susumu 0335 0218
          Sutron 0009
          Sydney 0216 0217
          Sysline 0037 0556
          Sytong 0216
          T+A 0447
          Tandberg 0367 0411 0109 0337 0361 0163
          Tandy 0218 0072 0217 0093 0163
          Tashiko 0036 0217 0170 0216 0163
          Tatung 0037 0556 0072 0516 0217 0011 0621
          TCM 0714
          Teac 0698 0512 0037 1437 1037 0556 0712 0668 0455 0217 0264 1909 0178 0009 0412 0349 0721 0282 0418
          TEC 0217 0009 0335 0337 0259 0037 0556
          0361 0163
          Tech Line 0037 0556 0668 1437
          Techica 0218
          Technema 0320
          TechniSat 0655 0037 0556 0163
          Tecnimagen 0556
          Tedelex 0217 0606 0009 0208 0587 0037 0556
          Teiron 0009
          Teknika 0060
          Teleavia 0109 0343
          Telecor 0037 0163 0556 0218 0217 0259
          Telefunken 0109 0498 0335 0073 0343 0037 0556 0486 0625
          Telefusion 0037 0556
          Telegazi 0037 0163 0556 0259 0218 0264
          Telemeister 0320 0037 0556
          Telesonic 0037 0556
          Telestar 0037 0556 0579 0412
          Teletech 0037 0556 0668 0009 0337
          Teleton 0217 0275 0206 0163 0349 0259 0036
          Televideon 0320 0163 0216
          Teleview 0037 0556
          Telexa 0102
          Tempest 0009 0037 0556
          Tennessee 0037 0556
          Tensai 0104 0218 0037 0556 0217 0320 0009 0105 0374 0371 0377 0715 0163
          Tenson 0320 0009
          Tevion 0519 0037 0556 0648 0668 1137
          Texet 0217 0374 0009 0216 0218
          Thomson 0625 0560 0109 0335 0343 0037 0556 0349
          Thorn 0193 0073 0190 0238 0499 0037 0104 0556 0335 0512 0374 0035 0108 0109 0225 0343 0361 1505 1010 0072
          Thorn-Ferguson 0104 0108 0109 0190 0238 0193 0361
          0335 0499 0073 0035
          TMK 0178 0177
          Tokai 0072 0037 0556 0337 0163 0668 0217 0374 0009
          Tokyo 0216 0035
          Tomashi 0282 0218
          Toshiba 0035 0060 0508 0036 0070 0102 1508 0217 0109 0718 0195 0191 0618
          Towada 0349 0102 0217
          Toyoda 0009 0371
          Trakton 0264
          Trans Continens 0668 0217 0037 0556
          Transonic 0037 0556 0455 0587 0512 0264 0698 0712
          Transtec 0216
          Triad 0037 0556
          Trical 0157
          Trident 0516 0217
          Tristar 0264 0218 0193
          Triumph 0177 0516 0346 0556 0037
          Tsoschi 0282
          TVTEXT 95 0556
          Uher 0037 0556 0206 0320 0374 0418 0486 0370 0259
          Ultravox 0087 0102 0374 0216 0163 0037 0556
          Unic Line 0037 0556 0473 0455 0349
          United 0037 0556 0714 0715
          Universum 0346 0105 0195 0473 0361 0492 0480 0370 0418 0011 0512 0036 0157 0070 0163 0264 0104 0037 0556 0421 0411 1505 1010 0668 0349 0217 0109 0337 0177 0631 0009
          Univox 0037 0556 0337 0087 0163 0238
          Utax 0163
          Vestel 0037 0163 0217 0556 0668 1037
          Vexa 0009 0037 0556
          Videologic 0218
          Videologique 0216 0218 0217
          VideoSystem 0037 0556
          Videotechnic 0216 0320 0217 0374
          Videoton 0356 0163
          Vidikron 0102
          Vidtech 0036 0178
          Viper 0337
          Visiola 0216
          Vision 0037 0556 0320 0217
          Vistar 0206 0361
          Vortec 0037 0556
          Voxson 0087 0037 0556 0418 0163
          Waltham 0217 0668 0356 0418 0037 0556 0109
          Watson 0037 0320 0556 0163 0218 0579 0519 0009 0668 1037
          Watt Radio 0102 0349 0163 0216
          Wega 0037 0556 0036 0087
          Wegavox 0009 0037 0556
          Weltblick 0037 0556 0320 0217
          Weston 0037 0556
          Wharfedale 0037 0519 0556
          White Wes-tinghouse 0320 0216 0037 0556 0337 1909
          Windsor 0668
          Windstar 0282 0337
          Windy Sam 0556
          Wintel 0714
          Xrypton 0037 0556
          Yamishi 0282 0455 0218 0037 0217 0556
          Yokan 0037 0556
          Yoko 0217 0037 0556 0218 0264 0009 0421 0370 0339 0216
          Yorx 0218
          Zanussi 0206 0217
          Zenith 1909
          Zenor 0339

               For More >>

          ↧

          URC 8040 - UNIVERSAL REMOTE CONTROL - SETUP CODE LIST FOR SATELLITE BOXES & DVDs

          May 28, 2013, 9:57 pm
          $
          0
          0


          CODE LIST

          Satellite boxes


          @sat 1300
          ABsat 0832 0123 1323 0710
          ADB 0642
          Adcom 0200
          AGS 0710
          Akai 0200
          Alba 0455 0713
          Allsat 0200 1017
          Alltech 0713
          Alpha 0200
          Altai 0396
          Amitronica 0713
          Ampere 0396 0132
          Amstrad 0345 0847 0713 0396 0132 0882 0885
          0863 0501 0795 1113
          Anglo 0713
          Ankaro 0713
          AntSat 1017 1083
          Apollo 0455
          Arcon 1205 0834 0132 1075
          Armstrong 0200
          Asat 0200
          ASLF 0713
          AssCom 0853
          Astacom 0710
          Aston 1261
          Astra 0108 0607 0713
          Astro 0133 0173 0501 0658 0607 1113 1099
          0200 0292
          Atlanta 0871
          Aurora 0879
          Austar 0863 0642 0497 0879 1176
          Avalon 0396
          Axiel 0710
          Axis 1111 0834
          Barcom 0108
          Beko 0455
          Bentley
          Walker 1017
          Blaupunkt 0173
          Blue Sky 0713 0885
          Boca 0132 0713
          Boston 0132 0710
          Broco 0713
          BskyB 0847 1175
          BT 0710
          Bubu Sat 0713
          Cambridge 0501
          Canal
          Satellite 0853 0292
          Canal+ 0853 0292
          Cherokee 0123 0710 1323
          Chess 0605 0713
          CityCom 1176 0115 0607 0299
          Clemens
          Kamphus 0834 0396
          Cobra 0396
          Colombia 0132
          Columbia 0132
          Comag 0132
          Condor 0607
          Connexions 0396
          Conrad 0607 0573 0115 0501
          Conrad
          Electronic 0607 0713
          Cryptovision 0455 0795
          Cyrus 0200
          D-box 1127 1114 0723
          Daeryung 0396
          Daewoo 1296 0713
          Delfa 0863
          Deltasat 1075
          DGTEC 1242
          Digatron 1294
          Digenius 0299
          Digiality 0607
          DigiQuest 0863
          Discoverer 0605
          Discovery 0710
          Diseqc 0710
          Distratel 0084 0885 1205
          Distrisat 0200
          DMT 1075
          DNT 0200 0396
          DREAM multi-media.TV 1237
          Echostar 0610 0871 0167 0853 1086 1200 0396
          0713
          Einhell 0132 0713 0501
          Elap 0713 0710
          Elsat 0713
          Elta 0200
          Emme Esse 0871
          Engel 1017 0713
          EP Sat 0455
          Eurieult 0084 0885 0882 0136
          Eurocrypt 0455 0108
          Europa 0863 0607 0501 0200
          Europhon 0299 0607
          Eurosky 0607 0132 0299 0115 0114 0501
          Eurostar 0607 0115
          Fenner 0605 0713
          Ferguson 0455
          Fidelity 0501
          Finlandia 0455 0108
          Finlux 0108 0573 0455
          Flair Mate 0713
          Force 1101
          Fortec Star 1017 1083
          Foxtel 0879 0720 0455 0497 0795 1176 0345
          Fracarro 0871
          Freecom 0501 0173
          Freesat 0882
          FTEmaximal 0713 0863
          Fuba 0396 0173 0573 0108 0115 0299
          Galaxis 1111 1101 0834 0863 1176 0853 0115
          0879
          Garnet 1075
          GF 0834
          GOD Digital 0200
          Goldbox 0292 0853
          Goldvision 1017
          Goodmans 1284 0455
          Gradiente 0887
          Granada 0108 0455
          Grandin 0084 0136
          Grundig 0173 0847 1291 0345 0879 0885 0853
          0501
          Hanseatic 0605 1099
          Hänsel &
          Gretel 0132 0607
          Hauppauge 1294
          HDT 1011
          Heliocom 0607
          Helium 0607
          Hirschmann 0396 0882 1113 1111 0173 0573 0299
          0501 0710 0607 0108
          Hitachi 0455
          Houston 0396
          Humax 1176 0863
          Huth 0132 0607 1017 1075
          Hypson 0136
          Hyundai 1011 1159 1075
          ID Digital 1176 0863
          Imex 0084 0136
          Ingelen 0396 0882
          International 0132
          Interstar 1017
          Intervision 0607
          Invideo 0871
          Italtel 0871
          ITT 0108
          ITT Nokia 0108 0573 0455 0723
          JOK 0710
          K-SAT 0713
          Kamm 0713
          Kaon 1300
          KaTelco 1111
          Kathrein 0658 0249 0173 1221 0200 0713 0123
          0115 1323 0710
          Kathrein
          Eurostar 0115
          Kiton 0114
          Klap 0710
          Konig 0607
          Koscom 0834
          Kreiling 0658 0249 0114
          Kreiselmeyer 0173
          Kyostar 0132
          Labgear 1296
          LaSAT 0607 0115 0132 0299
          Lenco 0713 0115 0607
          Lenson 0501
          Lexus 0200
          LG 1075
          Lifesat 0605 0299 0713
          Logix 1017 1075
          Lorenzen 0299 1294 0607 0132
          Luxor 0108 0345 0573 0501
          M&B1 0605
          Manata 0710 0136 0713
          Manhattan 1083 0455 0710 0834 1017
          Marantz 0200
          Maspro 0713 0173
          Matsui 0710 0173
          Max 0607
          MB 0605
          Mediabox 0292 0853
          Mediacom 1206
          MediaSat 0501 0292 0853
          Medion 0713 0299
          Medison 0713
          Mega 0200
          Metronic 0713 1282 0084 0136 0885 1205
          Metz 0173
          Micro 0607 0501 0713
          Micro
          electronic 0713
          Micro
          Technology 0713
          Micromaxx 0299
          Microtec 0713
          Mitsubishi 0455
          Morgan's 0200 0713 0132
          Motorola 0856
          Multichoice 0642 0879
          Myryad 0200
          Mysat 0713
          Netgem 1322
          Neuhaus 0501 0713 0834 0607
          Neusat 0713 0834
          Nikko 0713 0723 0200
          Nokia 1114 0751 1127 0723 0853 0573 0108
          0455 1723
          Nordmende 0455
          Nova 0879
          OctalTV 1294
          OnDigital 0751 0329 0241 0867 0133
          Optex 0834
          Optus 0879 0292 0853
          Orbitech 1099 0200 0292 0501
          Origo 0497
          OSAT 0345
          Ouralis 1205
          Pace 0455 0847 0887 1175 0241 0867 0123
          1323 0795 0720 0497 0200 0853 0710
          Packsat 0710
          Palcom 0299
          Palladium 0501
          Palsat 0501
          Panasat 0879
          Panasonic 0847 1104 0455 1320
          Panda 0455 0108 0607 0173 0834
          Philips 0200 1114 0292 0853 0455 0710 0173
          0133
          Phonotrend 0863 1017 1200
          Pioneer 0329 0853 0292 0352
          Planet 0871 0396
          Polytron 0396
          Preisner 0132 0396 1101 1113
          Premier 0292
          Premiere 0853 1114 1127 0723 1111 1176 0249
          0658
          Primacom 1111
          Profile 0710
          Promax 0455
          Pyxis 0834
          Quadral 0710 1323
          Quelle 0607 0115
          Radiola 0200
          Radix 0396 1113 0882
          RFT 0200
          Roadstar 0713
          Rover 0713
          Saba 0710 0885 0115 0607
          Sabre 0455
          Sagem 0820 1114 1253
          Salora 0108
          Samsung 0863 1243 0853 1206 1017 1244 1293
          SAT 0501
          Sat Control 1300
          Sat Partner 0501
          Sat Team 0713
          Satcom 0605 0607
          Satec 0713 0834
          Satstation 1083
          Schneider 0710 1206
          Schwaiger 0605 0607 0885 1111 0132 1075
          SCS 0115 0299
          Seemann 0396
          SEG 0605 0114
          Seleco 0871
          Septimo 1205 0885
          Servi Sat 0136
          Siemens 0173
          Skantin 0713
          Skinsat 0501
          SKR 0713
          Sky 0847 0856 0887 1014
          SKY+ 1175
          Skymaster 0713 0605 1200 1075
          Skymax 0200
          SkySat 0605 0713
          SL 0132
          SM Electronic 0713 1200 1075
          Smart 0132 0299 1101 0882 0396 1113 0115
          0713
          Sony 0847 0853 0455 0292
          SR 0132
          Starland 0713
          Strong 0879 0853 1159
          STVI 0136
          Sunsat 0713
          Sunstar 0132
          Tantec 0455
          Tatung 0455
          Tecatel 1200
          TechniSat 0200 0292 1099 0501
          Technosat 1206








          >>> For More >>> 

          Technowelt 0607 0885
          Techsan 1017
          Techwood 0114
          Telasat 0605 0115 0607
          Telecom 0713
          Telefunken 0710
          Teleka 0396 0501 0607 0834
          Telesat 0605 0607
          Telestar 0501 1099 0114 0200 0292
          Teletech 0114
          Televes 0455 0501 0132
          Thomson 0455 1900 0713 0292 0853 0115 0607
          1291 0820 0710 1046
          Thorn 0455
          Tokai 0200
          Tonna 0455 0501 0713 0834
          Topfield 1206
          Toshiba 0455
          TPS 0820 1253
          Triasat 0501
          Triax 0501 0115 0200 0396 0713 0853 0114
          1296 1291 0132
          Turnsat 0713
          Twinner 0132 0136 0713
          UEC 0879
          Unisat 0200
          Universum 0173 0607 0299 0115
          Van Hunen 0299
          Variosat 0173
          Ventana 0200
          VH-Sat 0299
          Visiosat 0710 0713
          Wetekom 0605 0501
          Wewa 0455
          Wisi 0173 0396 0299 0455 0501 0607 0834
          Worldsat 0710 0114 0123
          XCOM 0832 0123
          XSat 0832 0713 0123
          Xtreme 1300
          YES 0887
          Zehnder 1075 0114 0115
          Zenith 0856
          Zeta
          Technology 0200
          Zinwell 1176

          DVDs

          3DLAB 0539
          A-Trend 0714
          Acoustic
          Solutions 0730
          AEG 0788 0770
          Aiwa 0641 0695
          Akai 0790 0788 0690 0713 0705
          Akira 0699
          Alba 0717 0699 0713 0723 0695
          All-Tel 0790
          Amitech 0770 0850
          Amoisonic 0835
          Amstrad 0713
          AMW 0872
          Apex Digital 0672
          Audiosonic 0690
          AWA 0730
          Black
          Diamond 0713
          Blaupunkt 0717
          Blue Sky 0699 0695 0713 0672
          Boman 0783
          Brain Wave 0770
          Brandt 0651
          Bush 0699 0690 0717 0713 0818 0695 0831
          0723
          C-Tech 0768
          Cambridge
          Audio 0696
          Cambridge
          Soundworks 0696
          CAT 0699
          Celestial 0672
          Centrex 0672 1004
          Centrum 0713
          cineULTRA 0699
          Classic 0730
          Clatronic 0788
          Clayton 0713
          Coby 0730
          Conia 0835 0672
          Continental
          Edison 0872
          Crown 0770 0651 0690
          Cybercom 0831
          CyberHome 0714 0816
          Cytron 0651 0705
          Daewoo 0770 0705 0714
          Daewoo
          International 0872 0699
          Dansai 0770 0783
          Dantax 0723
          Daytek 0872
          Dayton 0872
          DEC 0699 0818
          Decca 0770
          Denon 0490 0634
          Denver 0699 0788
          Denzel 0665
          Diamond 0651 0768 0723
          Digihome 0713
          digiRED 0717
          Digitrex 0672
          DiK 0831
          Dinamic 0788
          DiViDo 0705
          DK digital 0831
          DMTECH 0783 0790
          Dragon 0831
          Dual 0665 0651 0713 0730 0783 0790 0831
          E-Boda 0723
          Eclipse 0723
          Electrohome 0770
          Elin 0770
          Ellion 0850
          Elta 0690 0770 0788 0790
          Emerson 0591 0705
          Enzer 0665
          Ferguson 0651
          Finlux 0741 0770 0783
          Funai 0695
          GE 0717
          Global
          Solutions 0768
          Global Sphere 0768
          Go Video 0783
          GoldStar 0591 0741
          Goodmans 0651 1004 0790 0690 0783 0723 0818
          Graetz 0665
          Grundig 0539 0695 0651 0775 0705 0790 0713
          0723
          Grunkel 0770
          H&B 0818 0713
          Haaz 0768
          Hanseatic 0741
          Harman/
          Kardon 0702
          HCM 0788
          HDT 0705
          HE 0730
          Henß 0713
          Hitachi 0665 0573
          Hiteker 0672
          Hoher 0831
          Home
          Electronics 0730
          Hyundai 0783 0850
          Ingelen 0788
          ISP 0695
          JBL 0702
          Jeken 0699
          JMB 0695
          JVC 0623 0539 0503 1901
          Karcher 0783
          Kendo 0699
          Kenwood 0534 0490 0737
          Kiiro 0770
          Kingavon 0818
          Kiss 0665
          Koda 0818
          Koss 0651
          Lawson 0705 0768
          Lecson 0696
          Lenco 0699 0651 0770 0818
          Lenoxx 0690
          Lexia 0699
          LG 0591 0741 1906
          Lifetec 0651
          Limit 0768
          Loewe 0539
          LogicLab 0768
          Logix 0705 0783
          Lumatron 0705
          Luxman 0573
          Luxor 1004
          Magnavox 0503 0818
          Magnex 0723
          Manhattan 0705
          Marantz 0539
          Mark 0713
          Matsui 0651 0695
          MBO 0690 0730
          MDS 0699
          Medion 0651 0783 0831
          Memorex 0831
          Metz 0571 0525 0713
          MiCO 0723
          Micromaxx 0695
          Micromedia 0503 0539
          Micromega 0539
          Microsoft 0522
          Minato 0752
          Minax 0713
          Minoka 0770
          Mitsubishi 0713
          Mizuda 0818
          Monyka 0665
          Mustek 0730
          Mx Onda 0651 0723
          NAD 0741
          Naiko 0770
          Neufunk 0665
          Nordmende 0831
          Noriko 0752
          Okano 0752
          Omni 0690 0699
          Onkyo 0503 1612
          Optimus 0571 0525
          Orava 0818
          Orion 0695
          Oritron 0651
          P&B 0818
          Pacific 0768 0790 0713 0831
          Palladium 0695
          Palsonic 0835 0672
          Panasonic 0490 1908 1909 1910 1905 1010
          Panda 0783
          Philips 0539 0646 0503 1914
          Phonotrend 0699
          Pioneer 0571 0525 0631 1900 1902
          Pointer 0770
          Proline 0651 0686 0672 0790 1004
          Proscan 0522
          Prosonic 0699
          Provision 0699
          Radionette 0741
          Raite 0665
          RCA 0522 0651
          REC 0490
          Red Star 0770 0788
          Reoc 0768 0752
          Revoy 0699
          Roadstar 0699 0690 0713 0818
          Ronin 0872
          Rotel 0623
          Rowa 1004
          Saba 0651
          Sabaki 0768
          Salora 0741
          Sampo 0752
          Samsung 0573 0490 1932
          Sansui 0695 0768 0723 0770
          Sanyo 0695 0790
          Scan 0705 0835 0850
          ScanMagic 0730
          Schaub
          Lorenz 0788 0770
          Schneider 0651 0783 0705 0790 0788
          Schwaiger 0752
          Scientific Labs 0768
          Scott 0651 0672
          SEG 0665 0713 0768
          Shanghai 0672
          Sharp 0630 0752 0695
          Sherwood 0717 0741
          Shinco 0717
          Silva 0788
          SilvaSchneider 0831
          Singer 0690 0723
          Skymaster 0730 0768
          Slim Art 0770
          SM Electronic 0730 0768 0690
          Smart 0705 0713
          Sony 0533 0573 1903 1904
          Soundmaster 0768
          Soundmax 0768
          Soundwave 0783
          Standard 0651 0768
          Starmedia 0818
          Sunwood 0788
          Supervision 0730 0768
          SVA 0672
          Synn 0768
          Tatung 0770
          Teac 0717 0741 0571 0591 0768 0790 1930
          Technics 0490 1905 1908 1909 1910
          Technika 0770
          Techwood 0713
          Tensai 0690 0651
          Tevion 0651 0768
          Theta Digital 0571
          Thomson 0551 0522
          Tokai 0665 0788
          Tokiwa 0705
          Toshiba 0503
          TRANS-continents 0872
          Umax 0690
          United 0788 0730 0790
          Universum 0741 0713 0591
          Venturer 0790
          Vieta 0705
          Voxson 0730 0831
          Walkvision 0717
          Welkin 0831
          Wesder 0699
          Wharfedale 0686 0696 0723 0752
          Windy Sam 0573
          XBox 0522
          XLogic 0770 0768
          XMS 0788
          Yamada 1004
          Yamaha 0490 0539 0646
          Yamakawa 0665
          Yukai 0730
          Zenith 0503 0591 0741


          ↧
          ↧

          URC 8040 - UNIVERSAL REMOTE CONTROL - PROGRAMMING PROCEDURE - DIRECT CODE ENTRY - CODE SEARCH

          May 28, 2013, 10:55 pm
          $
          0
          0

          LEARNING FEATURE
          The KAMELEON 4 comes with a complete library of pre-programmed codes.  After you have set up the KAMELEON 4 for your device, you may find that there are one or more keys that you had on the original remote control, which do not have a place on the KAMELEON 4 keypad.  The KAMELEON 4 offers a special Learning feature that allows you to copy almost any function from your original remote control onto the keypad of the KAMELEON 4.
          • Make sure your original remote is working correctly.
          • Make sure neither your KAMELEON 4, nor your original remote control is pointing at your device.
          • Place the KAMELEON 4 and your original remote control on a flat sur-face. Make sure the ends, which you normally point at your device, are
          • facing each other. Point the original remote to the front left side of the KAMELEON 4 (see picture below). Keep the remotes at a distance of 2 to 5 cm (0.8 to 2 inches).
          Learning (direct)
          Ex:  To copy the “mono/stereo” function from your original TV remote control onto the ”16:9”-key of your KAMELEON 4.
          • Press and hold down the MAGIC key (for about 3 seconds) until the rabbit comes out of the hat.
          • Press 9 7 5. The bottom part of the animated IR Indicator will blink twice.
          • Press the device key (Example: TV key) on the KAMELEON 4 remote to select the mode to which you want to copy the learned function.
          • Press the key (Example: ”16:9” key) on the KAMELEON 4 remote where you want to place the learned function. The IR Indicator will show “incoming IR” three times and then the display will switch off.
          • Press and hold the key that you want to copy (Example: mono/stereo) on your original remote control. The display switches back on and you will see two blinks to indicate successful learning operation.
          If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning. If your want to copy another function in a different mode, simply continue with step 4 followed by steps 5 and 6.
          To exit the learning mode, press and hold down the MAGIC key (for about 3 seconds) until the bottom part of IR Indicator blinks four times.
           “EL” Screen activation setting
          • Press and hold the MAGIC key until the rabbit comes out of the hat.
          • Press 9 8 9.
          • If the bottom part of the animated IR Indicator blinks twice the “EL” panel will be motion activated.
          • If the bottom part of the animated IR Indicator blinks four times the “EL” panel will be activated by key press.
          • Simply perform these steps to lock the KAMELEON 4 to the activation setting that you prefer.
          “EL” Screen brightness adjustment
          • Press and hold the MAGIC key until the rabbit comes out of the hat.
          • Press 9 7 4.
          • To increase the brightness of the “EL” screen press and hold CH+.
          • To decrease the brightness of the “EL” screen press and hold CH-.
          • Press MAGIC to store the brightness setting.
          • Find your device code in the Code list.
          • Make sure your television is switched ON (not on standby).
          • Press and release the TV key on your KAMELEON 4.
          • Press and hold down the MAGIC key (for about 3 seconds) until the rabbit comes out of the hat.
          • Enter your four-digit code using the number keys. The bottom part of the animated IR Indicator will blink twice.
          • Now, aim your KAMELEON 4 at your television and press POWER. If your television switches off, your KAMELEON 4 should be ready to control your television.
          • Turn your device (television) back on and try all the remote’s functions to ensure they are working properly. Most TV’s do not switch back on pressing the POWER key, please try pressing a “number” key or the “TV-text off” key to switch your TV back on.
          Search Method
          • Switch ON your Television (not on standby).
          • Press and release the TV key on your KAMELEON 4.
          • Press and hold down the MAGIC key (for about 3 seconds) until the rabbit comes out of the hat.
          • Press 9 9 1, the bottom part of the animated  IR Indicator will light up twice.
          • Next, press POWER.
          • Point the KAMELEON 4 at your Television. Now press CH+ over and over, until your Television turns off(every time you press the CH+ key the KAMELEON 4 will send out a POWER signal from the next code contained in the memory). You may have to press CH+ many times (up to 150 times) so please be patient. Remember to keep pointing the KAMELEON 4 at your Television while pressing this key. (If you skip past a code, you can go to the previous code(s) by  pressing the CH - key.)
          • When your Television switches off, press the MAGIC key to store the Code. The bottom part of the animated IR Indicator will light up twice. Now your
          • KAMELEON 4 should be ready to control your television.
          • Turn your device (television) back on and try all the remote’s functions to ensure they are working properly.
          • If you cannot control your Television properly, please continue the Search Method, you may be using the wrong Code.
          Code blink out [To find out which code is currently programmed]
          • Press the TV key on your KAMELEON 4.
          • Press and hold down the MAGIC key until the rabbit comes out of the hat.
          • Press 9 9 0, the bottom part of the animated IR Indicator will light up twice.
          • For the first digit of your four-digit code, press 1 and count the blinks on the bottom part of the animated IR Indicator. If there are no blinks, the digit is “0”
          • For the second digit, press 2 and count the animated blinks. If there are no blinks, the digit is “0”
          • For the third digit, press 3 and count the animated blinks. If there are no blinks, the digit is “0”
          • For the fourth digit, press 4 and count the animated blinks. If there are no blinks, the digit is “0”
          The KAMELEON 4 features an “EL” panel which is motion activated or key press activated depending on the current setting.
          To change the activation setting:
          To increase or decrease the brightness of the KAMELEON 4 “EL” screen.
          Increasing the brightness of the KAMELEON “EL” panel can decrease the battery life. Battery life varies from 3 -12 months (depending on brightness setting and usage).
          Direct Code Set Up.  To set up the KAMELEON 4 for your television.
          If your device does not respond, follow steps 1 through 6 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Method.
          Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.
          If the original remote control from your Video Recorder did not have a POWER key, press PLAY instead of POWER during step 6.
          To set up your other devices, follow the same instructions above, only press the appropriate device key during step 3.
          Remember to press the correct device key before operating your device. Only one device can be assigned to a device key.
          If your device does not respond to the KAMELEON 4 after you have tried all the codes listed for your brand.
          If your brand is not listed at all.
          The Search Method allows you to scan through all the codes contained in the memory of the KAMELEON 4
          During step 5, instead of POWER you can also press 0,1, 2, 3, VOL+, PLAY, STOP or MUTE. This will be the function sent for the next key presses of CH+ or CH- in step 6. If for example; during step 5, you press “2” instead of “POWER”, the KAMELEON 4 will send the “number 2” signal every time you press CH+ during step 6 (make sure your TV is switched to another channel).
          During step 6, while searching you can sample any of the following keys 0, 1, 2, 3, VOL+, PLAY, STOP, MUTE and thereafter continue the search (CH+ on CH-) with the last function sampled. Pressing CH+ will send the signal from the next code contained in the memory. Pressing CH- will send the signal from the previous code. This can be useful if you missed the code while searching (reversed search).
          To search for your other devices, follow the same instructions above, only press the appropriate device key during step 2.
          If your Video’s original remote control does not have a POWER key, press PLAY instead of POWER during step 5.
          If you have set up your KAMELEON 4 via the Search Method, you can blink back your code for future reference. Note that the bottom part of the animated IR Indicator will indicate the 4 digits by animated blink(s).
          Now you have found your four-digit code.
          To blink back the code for your other devices follow the instructions above, only press the appropriate device key during step 1

          ↧

          PANASONIC TH37PX50U – TH42PX50U – TH50PX50U - SELF CHECK - POWER LED BLINKING CODES & TROUBLESHOOTING TABLES

          May 29, 2013, 6:06 am
          $
          0
          0


          SELF CHECK FUNCTION
          When symptoms like “the power fails sometimes” or “sometimes there is no picture and/or sound” can not be confirmed at the time of servicing, the self-check function can be used to confirm the occurrence and to find the defective circuit.  In case of “power failure”, flashing of the “POWER” indication (red) at the front of the unit can be used to narrow down the +B line.
          TO ACCESS SELF CHECK SCREEN
          • Produce TV reception screen and, while pressing [VOLUME-] button on the main unit, press [SLEEP] button on the remote controller unit simultaneously.
          TO EXIT SELF CHECKWhen the AC code is pulled out and opened, the display returns to the normal screen.SELF CHECK SCREEN DISPLAY
          SOS:1 DR  ERR   INCH***** => Displays only in abnormal circumstances.
          POWER LED BLINKING CODES
          • When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
          Fan function is operated during the fans are installed. Click on tables to Magnify

          TROUBLESHOOTING [NO POWER]

          There are following 2 states of No Power indication by power LED.
          1. No lit
          2. Red is lit then turns red blinking a few seconds later.
          NO LIT
          NO PICTURE
                                                                       NG => Not Good
          LED INDICATORS AT DRIVE CIRCUIT BOARDS
          TH-37PX50U
          TH-42PX50U
          TH-50PX50U
          SCREEN FAILUREPlasma display may have local area failure on the screen.TH-37 _ 42PX50U
          TH-50PX50U
          SERVICE MODE
          • While pressing [VOLUME - ] button of the main unit, press [RECALL] button of the remote control three times in a row (within 2 seconds).
          • Adjustment method.....Use the remote control.
          • “1” button...Main items Selection in forward direction
          • “2” button...Main items Selection in reverse direction
          • “3” button...Sub items Selection in forward direction
          • “4” button...Sub items Selection in reverse direction
          • “VOL” button...Value of sub items change in forward direction (RIGHT), in reverse direction (LEFT).
          TO EXIT SERVICE MODE
          • Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.

          ↧

          PANASONIC TH-37PX50U – TH-42PX50U – TH-50PX50U - DRIVER SETUP - QUICK ADJUSTMENTS AFTER BOARD EXCHANGE - Adjustment Volume Location - Test Points - Hotel Mode

          May 29, 2013, 8:53 am
          $
          0
          0


          PREPARATION 
          • Input an APL 100 % white signal.
          • Set the picture controls: -Picture mode: Normal.  White balance: Cool.  Aspect: 16:9.
          ADJUSTMENTS
          Adjust driver section voltages referring the panel data on the panel data label.
          TH-37PX50U
          TH-42PX50U
          TH-50PX50U
          PANEL LABEL INFORMATION
          PRINTED CIRCUIT BOARD EXCHANGE
          To remove P.C.B. wait 1 minute after power was off for discharge from electrolysis capacitors.
          QUICK ADJUSTMENT AFTER BOARD EXCHANGE {Click on pictures to Magnify}
          TH-37PX50U
          TH-42PX50U
          TH-50PX50U
          ADJUSTMENT VOLUME LOCATION & TEST POINTS
          TH-37PX50U
          TEST POINTS

          TH-42PX50U
          TEST POINTS

          TH-50PX50U
          TEST POINTS

          HOTEL MODE
          Access command
          • Press MUTE button on remote control. Hold few seconds.
          • Press the CH ▲/▼ button and VOL ▲/▼  button to Set the data of EEPROM(ADDRESS 1584) to 01
          • Push the Power switch (button) off/on the set (the remote control) to turn the set off/on.
          TO EXIT HOTEL MODE
          • First, set the data of EEPROM (ADDRESS 1584) to 00.
          • Push the Power switch (button) off/on the set (the remote control) to turn the set off/on.  Then, it is no longer hotel mode.
          ACCESS COMMAND TO THE HOTEL MODE SETUP MENU
          In order to display the Hotel mode setup menu, enter the following command (within 2 second).
          [TV] : Vol. ▼ + [REMOTE] : TV/VIDEO (3 times).

          ↧
          Viewing all 2033 articles
          Browse latest View live
          Search
          <script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>