↧
SHARP LC-32LE40E LC-32LE40E - PHILIPS 32PFL4007D - POWER SUPPLY [SMPS] SCHEMATIC
↧
PHILIPS TPS-2 [CLICK] - LCD TV - POWER & INVERTER SCHEMATICS (Circuit Diagram)
CLICK ON THE PICTURES TO MAGNIFY
↧
↧
HOW TO ENTER SERVICE MODE PHILIPS TPS2 (CLICK) -LCD TV - ERROR CODES
The Customer Service Mode (CSM) is used for communication between the call center and the customer, while the Service Alignment Mode (SAM) offers several features for the service technician. This chassis also offers the option of using ComPair, a hardware interface between a computer and the TV chassis. It offers the abilities of structured troubleshooting, error code reading, and software version read-out for all chassis.
Customer Service Mode (CSM)
Purpose: The Customer Service Mode shows error codes and information on the TV's operation settings. The call center can instruct the customer (by telephone) to enter CSM in order to identify the status of the set. This helps the call center to diagnose problems and failures in the TV set before making a service call.
The CSM is a read-only mode; therefore, modifications are not possible in this mode.
How to Activate CSM
Key in the code “123654” via the standard RC transmitter. Note: Activation of the CSM is only possible if there is no (user) menu on the screen.
How to Navigate
By means of the "CURSOR-DOWN/UP" knob (or the scroll wheel) on the RC-transmitter, can be navigated through the menus.
General
* ModelPhilips Model type number (12 characters maximum)
* Production serial numberDisplays the production serial number of the TV. Note that if an NVM is replaced or is initialized after corruption, this production code has to be re-written to NVM. ComPair will foresee a in possibility to do this.
* Software version
# Format: TPAA.AA V2.XX_Y_Z
# TPS2.2E is the chassis name
V2.02 is the version and revision
# Y is the vendor code (1 digit):
# Z is the panel revision code(1 digit):
* Codes Displays the latest 5 error codes (Layer 2) status.
# 000 = No problem
# 011 = I2C bus error
# 012 = tuner error
* SSB Displays the 12NC of the SSB (Small Signal Board).
* Display Displays the 12NC of the display (LCD Panel).
* PSU Displays the 12NC of PSU (Power Supply Unit).
* NVM version and revision
* PQ Version and revision
* HDCP key Valid or Invalid
* Signal quality/present TV shows the digital reception quality, ATV shows whether analogue reception is available
* Audio system Mono, Stereo or Dual language
* Video format Displays the received video system (Pal, Secam, NTSC)
* Standby uP SW version and revision
How to Exit CSM
Press "MENU" on the RC-transmitter.
Service Alignment Mode (SAM)
How to enter
To enter the factory mode, use the following method:
* Press the following key sequence on the remote control transmitter: "062596" directly followed by the "INFO" button. After entering the factory mode, the following screen is visible on the top and right of the panel.
How to Navigate
With the up/down cursor keys can be used to navigate through the menu, while with the Left/Right cursor then values can be changed.
How to EXIT
Choose "EXIT", and press the "OK" button. Turn “Off” the TV via the side control key and then turn “On” the TV again.
Error Codes
The error code buffer contains all errors detected since the last time the buffer was erased. The buffer is written from left to right. When an error occurs that is not yet in the error code buffer, it is displayed at the left side and all other errors shift one position to the right.
{Make sure that the volume is set to minimum during Disconnecting the speakers in the ON-state of the TV. Disconnecting the speakers during ON-state of the set can damage the audio amplifier}
↧
SERVICE MODE - DAEWOO - DLP32B1-DLP26B1-DLP15B1 – TFT LCD TV
Service Menu is entered by pressing 9, 3, 0, 1 keys on the remote controller when the Picture icon is highlighted in the Main Menu.
Service Menu has 3 sub-menus. These are:
* Options
* Adjustments
* Selections.
Pressing OK button can do navigation through these menus. Every adjustment made in this menu is saved automatically.
OPTIONS
Options are adjustments that the user can select On or Off.
BG
DK
I
LL’
SCART 2
FAV
SVHS
HOTEL MODE
STAND BY
MSP CARRIER MUTE
WSS SCART
FIRST ATS
BG / DK / I / LEnabling or disabling these options will remove / add these standards to Manual Install menu, SYSTEM item.
SCART 2 / FAV / SVHS
If a source is disabled in the Service Menu, it will be skipped during source switches. If SCART2 is enabled, SW assumes that the FAV source share the same path as the SVHS source on the HW. If it is disabled, it is assumed that FAV and SVHS share separate paths. TUNER and SCART1 are enabled by default.
HOTEL MODE
Enabling Hotel Mode has two effects. First, SETUP menu is no longer accessible by the user. Second, maximum adjustable volume value is limited to HOTEL VOLUME value. This value can be adjusted in the ADJUSTMENTS sub-menu of the Service Menu.
STAND BY
If this Option is OFF, the TV will stay in Stand By mode after a Power On. If this Option is ON, the TV will recall its last stand by status before the Power Off, and switch on from Stand By automatically, if the last state was ‘Stand by On’.
MSP CARRIER MUTE
If this option is ON, sound processor’s carrier mute functionality will be enabled. The MSP will mute the sound automatically if the signal quality is bad. Setting this option Off will disable this functionality.
WSS RF / WSS SCART
Automatic picture format switching for WSS and Pin8 can be enabled or disabled through this option. If WSS SCART is set to OFF, AUTO picture format mode will be disabled for SCART1 and SCART2 modes. Pin8 source switching will still be operational, but no picture format changes from Pin8 voltage level will be ignored.
ATS
If this option is set to ON, TV will display Country Selection menu in the next start. After some country is selected, the user will be prompted for the start of Auto Programming process.
ADJUSTMENTS
This sub-menu contains numeric adjustments. These items are:
WHITE R
WHITE G
WHITE B
PRESCALE FM
PRESCALE NICAM
PRESCALE SCART
HOTEL VOLUME
WHITE R / WHITE G / WHITE B
These are used for color bias adjustment. Unlike other items in the service menu, changes will take effect immediately.
PRESCALE FM / PRESCALENICAM / PRESCALE SCART
These are prescale values that will be used for the initialization of the sound processor (MSP), at the next switch on.
HOTEL VOLUME
This value is used as the volume limit, when the Hotel Mode is on.
SELECTIONS
This sub-menu contains selections.
TUNER TYPE SAMSUNG / PHILIPS
TELETEXT NO TEXT / FAST / FAST&TOP
MSP CLIP REDUCE VOL / REDUCE TONE / COMPROMISE / DYNAMIC
TUNER TYPE
One of two-supported tuner can be selected from this item. System must be restarted for this change to take effect.
TELETEXT
NO TEXT: Teletext is totally disabled. TXT/MIX button will not be functional. AUTO picture format mode will be disabled in RF, F-AV and SHVS modes. Naming and sorting functionality during Auto programming will be disabled.
FAST: TO Ptext functionality will be disabled.
FAST&TOP: TO Ptext functionality is enabled.
TIMER MODE
If OFF TIMER is selected, the user will be able to enter time of the day info for the TV to switch off. If
SLEEP TIMER is selected, the user can specify some time period, after which the TV will go to stand by automatically.
MSP CLIP
This selection identifies which method will be used by the sound processor to prevent clipping effects on volume.
AUTOPROGRAMMING
When the user selects the Auto program item in Setup menu, Country Selection menu is opened. The user must select a country before the Auto programming starts. Broadcast system will be selected according to the country selected.
Broadcast systems according to countries:
BELGIUM BG + L
CROATIA BG
CZECH REP. DK
DENMARK BG
FINLAND BG
FRANCE L + BG
GERMANY BG
GREECE BG
HUNGARY DK
IRELAND I
ITALY BG
NETHERLANDS BG
NORWAY BG
POLAND DK
PORTUGAL BG
SPAIN BG
SWEDEN BG
SWITZERLAND BG + L
TURKEY BG
UNITED KINGDOM I
For countries France, Belgium and Switzerland, auto programming is done twice. For Belgium and Switzerland, first BG channels will be searched, after the search in BG is done, searching will restart for L standard. If the selected country is France, the sequence of standards isreversed, thus, first L then BG.
TELETEXT LANGUAGES
L5A SW decides which teletext language group will be used for teletext decoding, according to the country selected for autoprogramming.Teletext languages according to countries:
EAST EUROPE: CROATIA ,CZECH_REP, POLAND
WEST EUROPE: BELGIUM ,DENMARK, FINLAND, UK, FRANCE, GERMANY, IRELAND ,ITALY ,NETHERLANDS, NORWAY, PORTUGAL,SPAIN, SWEDEN, SWITZERLAND, HUNGARY TURKISH-GREEK:GREECE TURKEY
PC MODE
Pressing PC button on the remote controller can enter PC mode. User can return back to TV mode by pressing the PC or TV buttons.
After the switching to PC mode, VGA input will be displayed on screen, as soon as the mode (input resolution and frequency) is determined.
If there is no input from the VGA input, NO SIGNAL dialog will be displayed for 15 seconds. At the end of this period if there is no signal from VGA input, the TVwill go to Sleep State. While in the sleep state, the TV will keep monitoring the VGA input. If VGA signal is detected, the TV will wake from Sleep State, to PC
mode. Alternatively, the user may select to switch the TV on from Sleep State, just like switching on from Stand-by. In this case, the set will switch on from TV mode.
↧
SYLVANIA & EMERSON 6227FF - EWF2705 - 27"CTV - POWER AND DEFLECTION SCHEMTIC (Circuit diagram)
↧
↧
CCE CW3201 - D3201 - LIPS32 - LCD TV - POWER SUPPLY [SMPS] SCHEMATIC
CLICK ON THE SCHEMATIC TO ZOOM IN
↧
HISENSE & ELEMENT (ELCHW321) 32 inch LCD TVs - HOW TO REMOVE STAND & BACK COVER
STAND REMOVAL
Remove the 4 screws that secure the stand to the unit.
Slide stand from unit by gently pulling it towards you.
BACK COVER REMOVAL
Remove the 14 screws from the perimeter of the back cover.
Remove the remaining 2 screws from the centre section of the back cover.
Carefully lift the back cover from the unit.
WIRING PART NUMBERS
![]()
PARTS LIST
![]()
↧
TCL - KYOCERA FS-CS2126 - POWER SULLY REGULATOR [SMPS] - SCHEMATIC
↧
N2516 SCHEMATIC DIAGRAM - SMPS [Power Supply Regulator] - TEA2261 as Power Control
Click on the Schematic to Magnify
↧
↧
BN-44 - SAMSUNG POWER SUPPLY [SMPS[ - SCHEMATIC (Circuit diagram)
CLICK ON THE SCHEMATICS TO ZOOM IN
↧
TCL IPL42A - SMPS [POWER SUPPLY] AND INVERTER SCHEMATIC (Circuit Diagram)
CLICK ON THE SCHEMATICS TO MAGNIFY
↧
TCL LE32E1600 – MST6M182VG - POWER SUPPLY CIRCUIT DIAGRAM
SMPS SCHEMATIC [Click on the Schematic to Zoom In]
↧
860-ALZ-M713W-F - POWER SUPPLY & INVERTER SCHEMATIC (Circuit diagram)
Used with - AOPEN F70VS Generally Model 900P_MAG INNOVISION LP717 _ MAG INNOVISION LT716S _ PRoVIew MA-982K _ Lenovo LXM-L17CH _ PACKARD BELL Flatscreen _ FUJITSU SIEMENS SCALEOVIEW C19-3 _ FUJITSU SIEMENS SCALEOVIEW C19-4 _MAG INNOVISION LT982S _ PRoVIew 772HD _ PRoVIew UK713 _ Xerox 900P _ Xerox XA7 19
SMPS & INVERTER SCHEMATIC
CLICK ON THE SCHEMATIC TO ZOOM IN
↧
↧
TOSHIBA 15V31D CTV - POWER SUPPLY [SMPS] SCHEMATIC (CIRCUIT DIAGRAM)
CLICK ON THE SCHEMATIC TO ZOOM IN
↧
TOSHIBA 15V11F - CTV - SMPS SCHEMATIC - (Power supply Circuit Diagram)
↧
GRUNDIG CUC6368 - SMPS [POWER SUPPLY] - SCHEMATIC
CLICK ON THE SCHEMATIC TO MAGNIFY
↧
TOSHIBA 28N04D – 28N04F – 28N04N – CTV POWER SUPPLY-SCHEMATIC (Circuit Diagram)
CLICK ON THE SCHEMATIC TO ZOOM IN
↧
↧
OTVC ONWA TV3714 - SMPS [POWER SUPPLY] - SCHEMATIC (Circuit Diagram)
CLICK ON THE SCHEMATIC TO ZOOM IN
↧
PHILIPS MERIDIAN-1 231T1SB/00 – 231T1SB62 - POWER & BACK-LIGHT INVERTER - SCHEMATIC
CLICK ON THE PICTURES TO ZOOM IN
↧
HOW TO DISASSEMBLE PHILIPS MIRIDIAN-1 - LCD TV - 231T1SB/00 - 231T1SB/62
DISASSEMBLY
Carefully place the TV monitor face down on a smooth surface. Using a cross-head screwdriver unscrew three screws that secure the stand to the TV monitor, and firmly pull the stand from the bottom of the TV
Unscrew four screws that secure the rear cover to the TV monitor, and remove the rear cover.
Note: Be careful to avoid scratch and injury during the process of uninstall.
* Unscrew the screws that secure IR board, speakers and mainframe to the bezel, and remove the bezel.
* Remove the main frame
* Unscrew the screws that secure scalar board and power board to the main frame, and remove the boards.
* Unscrew the screws that secure the main frame to the panel.
* Disconnect the connectors.
↧